Make sure this part fits

GM 15956510
Torsion Bar, Front Passenger Side

1995-2005 GM

Customer Questions & Expert Answers (5)
GM 15956510 Torsion Bar, Front Passenger Side
  • Part Description
    Bar-Front Torsion
  • Position
    Front Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1995-2003 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1995-2003 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15956510 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15956510 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the torsion bar on GMC Jimmy? Posted by Customer
    A:
    To complete the servicing and repairing for torsion bar, start by raising and supporting the vehicle with the safety-stands. Unload both torsion bars through the Torsion Bar Loading/Unloading Tool (J 36202), recording the number of turns reached while releasing the adjusting bolt, and then remove the tool. Following this, take out the lower link mount nut from one side together with the torsion bars while making sure to identify the exact direction of the forward end and the side you are taking out from. Move on to extracting the lower link mount nut from the other side and the lower link mount and then continue to extracting the upper link mount nut and upper link mount. Finally, take off the torsion bar support from the frame. For installation, position the torsion bars in the same way they were removed and install the torsion bar support, upper link mount and upper link mount nut, tighten the upper link mount nut to 65 Nm (48 ft. lbs. ). Mount the bottom link mount bushing on it and use the jack stand to hold up the torsion bar support member, then install the lower link mount nut and tighten until it reaches 50 Nm (37 ft. lbs.). Adjust the torsion bar with a Torsion Bar Loading/Unloading Tool (J 36202) tightening the tool against the adjusting arm for the recorded number of turns to load the torsion bars. Pull the car down and determine the final Z trim height.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the installation process for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Attach the torsion bar links to the torsion bar support.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Torsion Bar
    Q:
    What is the first step to replace the torsion bar and support assembly for the 2002 Chevrolet S10? Posted by Customer
    A:
    Begin by raising and supporting the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Torsion Bar
    Q:
    How do you engage the adjustment arm with the torsion bar for the 2001 GMC Jimmy? Posted by Customer
    A:
    Attach the adjustment arm to the torsion bar support and slide the torsion bar rearward until it fully engages the adjustment arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Torsion Bar
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Torsion Bar, Front Passenger Side 15956510 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15956510 Torsion Bar, Front Passenger Side is available in the market under the name GM Torsion Bar. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15956510 Torsion Bar, Front Passenger Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15956510 maintains top performance when functioning as the Bar-Front Torsion unit at its Front Passenger Side. The component 15956510 is constructed from durable material and its dimensions span 54.1 x 1.8 x 1.7 inches while weighing 19.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Bar, Front Chassis. The part 15956510 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.