Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Pad, Seat Back Cushion; Pad, Ae7 - Front Split Bench (Except "D" Trim); Pad, A52 - Front Bench; Pad, Ae7 - Front Split Bench ("D" Trim)
Position: Driver Side
Replaces: 88941598
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Pad, Seat Back Cushion; Pad, Ae7 - Front Split Bench (Except "D" Trim)
Position: Driver Side
Replaces: 88941594
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Pad, Rear Seat Back Cushion; Pad, Ae7 - Front Split Bench ("D" Trim)
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Pad, Front Seat Cushion; Module; Pad, Seat Cushion; Seat Cushion
Position: Passenger Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Pad, Front Center Seat Cushion; Pad, Seat Cushion; Seat Cushion
Position: Front Center
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Chevrolet Silverado 1500 Classic Seat Cushion Pad
Our website offers an extensive catalog of genuine Chevrolet Silverado 1500 Classic Seat Cushion Pad at unbeatable prices. Every OEM Chevrolet Silverado 1500 Classic Seat Cushion Pad comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Silverado 1500 Classic Seat Cushion Pad Parts Questions & Experts Answers
Q: How to replace the front seat back cushion cover and Seat Cushion Pad on Chevrolet Silverado 1500 Classic?
A: The process of replacing the front seat back cushion cover and cushion pad begins with removing the head restraint followed by taking off the seat trim panel. The next step requires removing the nut from the lower Seat Belt anchor followed by detaching the j-strip retainer found at the bottom of the seat back cover. At this point disconnect the heater seat element connector when it exists. Take out the armrest from the seat if present before you can access the armrest clip through a partial lift of the seat back cover. To access the air bag cover put the flat-bladed tool inside the seat cover and pull it over the air bag. After that remove the seat cover to expose the entire seat area. The panel fasteners need disconnection for rear cardboard panel removal until the head restraint retainers can be unclipped. Get rid of all retaining bolts from the Seat Belt tower cover before pulling off the cover. First push the Seat Belt and Seat Belt bezel through the seat cover opening prior to lifting away the remaining part of the seat back cover from the foam pad and removing the foam pad from the frame. When installing the foam pad onto the frame first then follow up by attaching the Seat Belt tower while securing bolt retention for the Seat Belt tower cover at 1.9 n.m (17 lb in). Place the rear cardboard panel onto the frame while fastening its pieces and position the seat back cover partially onto the top section of the frame. The Seat Belt and bezel should first go through the tower opening before you put the armrest clip in place and move the remaining cover from side to side. First install armrests before wrapping the seat cover around the air bag cover when equipping the seat with them. Tighten the nut attached to the lower Seat Belt anchor at 53 n.m (39 lb ft). Conclude the installation by inserting the seat trim panel along with head restraints so that the velcro in the seat cushion retains the seat cover and connect the j-strip at the bottom of the seat.