Make sure this part fits

GM 88936413
Seat Cushion Pad, Front Center

2000-2007 GM

Customer Questions & Expert Answers (26)
GM 88936413 Seat Cushion Pad, Front Center
  • Part Description
    Pad, Front Center Seat Cushion
  • Position
    Front Center
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2003 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88936413 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88936413 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after the head restraint retainers for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Insert the plastic pushpin into the side seat belt guide and connect the J-clips to the trim.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you release the seat back cover for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Release the J-clips from the seat back cover and the hook and loop strips retaining the seat back cover to the foam pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you remove the seat cushion for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Lift the seat cushion off the rear plastic holders and pull it forward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done with the pressure sensor during installation for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Install the pressure sensor to the front passenger seat frame if applicable, and reconnect the electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What components need to be removed after lifting the seat cushion for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the seat switch bezel and the lumbar actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be secured after installing the seat cushion cover for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Secure the seat trim cover to the seat cushion frame, install the lumbar actuator, and the seat switch bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step in the installation process for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Attach the plastic retainers, frame suspension, and frame springs to the seat cushion frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step to service the rear seat cushion for both configurations for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Begin by removing the seat cushion trim cover and the pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install the seat trim panel and the head restraints, ensuring the seat cover is retained by the velcro in the seat cushion, and connect the J-strip at the bottom of the seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the installation process for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reconnect the electrical connectors, install the front nuts onto the studs on the underside of the cushion, and tighten them to 21 N.m (15 lb ft). Finally, install the front seat trim panel and re-zero the Inflatable Restraint Passenger Presence System.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in securing the seat cushion cover for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Finally, secure the seat cushion cover to the seat cushion frame with hog rings or J-clips, reinstall the rear passenger seat risers, and place the rear seat back into the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you remove the foam pad from the frame for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Lift the remainder of the seat back cover off the foam pad and carefully remove the foam pad from the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What components need to be installed after securing the trim cover for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install the lumbar actuator and the seat switch bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What can be used to facilitate the removal of the seat back cover for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Insert a piece of cardboard between the seat back cover and the foam pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the next step after removing the seat belt for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Remove the two front nuts on the underside of the seat cushion and unsnap the lumbar cable, disconnecting the lumbar wire harness if equipped with power lumbar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step to replace the rear seat back cushion cover and pad for 50/50 Split – 2nd Rear for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the quick release latch plates for the lap/shoulder belts using a drift punch or a similar tool to press into the release hole of the seat belt buckle while pulling on the safety belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you access the recliner bolts and hinge for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Lift the lower edge of the seatback cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step to replace the rear seat back cushion cover and pad in an Extended Cab for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    First, remove the rear seat from the vehicle and take out the headrests.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after installing the seat belt tower for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Install the rear cardboard panel and engage the panel fasteners.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you separate the seat cushion trim cover from the seat cushion pad for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Unclip the seat trim cover from the seat cushion frame and carefully separate it using a side motion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after placing the seat cushion cover on the foam pad for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Secure the center screw for the latch cover, tightening it to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How can you facilitate the removal of the seat back cover for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Insert a piece of cardboard between the seat back cover and the foam pad, then carefully lift the seat back cover from the foam pad, working from side to side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the installation process for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Reconnect the electrical connectors, install the front nuts onto the studs on the underside of the cushion, and tighten them to 21 N.m (15 lb ft). Finally, install the front seat trim panel and re-zero the Inflatable Restraint Passenger Presence System.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be disconnected if equipped for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Disconnect the rear heater connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step to replace the rear seat cushion cover and pad for the 60/40 split for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Begin by removing the seat latch cover and all J-clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Seat Cushion Pad, Front Center 88936413 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88936413 Seat Cushion Pad, Front Center is available in the market under the name GM Seat Cushion Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88936413 Seat Cushion Pad, Front Center fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 88936413 maintains top performance when functioning as the Pad, Front Center Seat Cushion unit at its Front Center. The component 88936413 is constructed from durable material while weighing 1.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pad, Seat Cushion; Seat Cushion. The part 88936413 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.