How to service the Clutch Slave Cylinder on the ZF S6-650 Transmission on Chevrolet Silverado 1500?

When servicing the Clutch Slave Cylinder for zf s6-650 transmission start by removing all manual transmission components. First disconnect clutch actuator cylinder bolts before you remove the clutch actuator cylinder. The clutch Release Bearing can be separated from the clutch actuator cylinder during replacement procedures if needed. The clutch actuator cylinder must be placed correctly before following the fastener notice in service precautions. After securing the clutch actuator cylinder bolts at 8 nm torque (71 inch lbs.) finish by reattaching the manual transmission.

How to replace the Clutch Slave Cylinder in NV3500/NV4500 Transmissions on Chevrolet Silverado 1500?

In order to replace clutch actuator cylinder in nv3500/nv4500 transmissions remove the manual transmission first. Take out the clutch actuator cylinder bolts, and remove the clutch actuator cylinder next. If necessary, the clutch Release Bearing can be unbolted from the clutch actuator cylinder if exchanging it. Installation should start with the clutch actuator cylinder, you follow the fastener notice in service precautions. Then, install the clutch actuator cylinder bolts and tighten to 8 nm (71 inch lbs) and finally install the manual transmission.

OEM Chevrolet Silverado 1500 Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Clutch Slave Cylinders found

View related parts
Chevrolet Silverado 1500 Slave Cylinder Part Number: 24264182
$163.71 MSRP: $278.73
You Save: $115.02 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Actuator; Clutch Slave Cylinder; Cylinder, Clutch Hydraulic Release Slave/Actuator
- Replaces: 15018532, 15727249, 15998501, 12565145, 15046288, 15742944
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chevrolet Silverado 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Silverado 1500 Slave Cylinder Part Number: 24264181
$220.74 MSRP: $347.33
You Save: $126.59 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Actuator; Clutch Slave Cylinder; Cylinder, Clutch Hydraulic Release Slave/Actuator
- Replaces: 12573664, 24235621
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 1500 Slave Cylinder Part Number: 24264179
$120.39 MSRP: $189.42
You Save: $69.03 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Actuator; Clutch Slave Cylinder; Cylinder, Clutch Hydraulic Release Slave/Actuator
- Replaces: 15027982, 12574147, 15060929
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet Silverado 1500 | Base, LS, LT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Silverado 1500 Slave Cylinder Part Number: 20958083
$180.70 MSRP: $284.32
You Save: $103.62 (37%)
ADD TO CART
Product Specifications
- Other Name: Cylinder, Clutch Hydraulic Release Slave/Actuator; Clutch Slave Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Silverado 1500 | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 1500 Slave Cylinder Part Number: 15019756
Product Specifications
- Other Name: Cylinder, Clutch Hydraulic Release Slave/Actuator; Clutch Slave Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet Silverado 1500 Clutch Slave Cylinder

Want to cut long-term maintenance and repair costs? Choose OEM Clutch Slave Cylinder. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Silverado 1500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Silverado 1500 Clutch Slave Cylinder includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Silverado 1500 Clutch Slave Cylinder Parts and Q&A

Slave Cylinder
24264181
Q: How to service the Clutch Slave Cylinder on the ZF S6-650 Transmission on Chevrolet Silverado 1500?
A:
When servicing the Clutch Slave Cylinder for zf s6-650 transmission start by removing all manual transmission components. First disconnect clutch actuator cylinder bolts before you remove the clutch actuator cylinder. The clutch Release Bearing can be separated from the clutch actuator cylinder during replacement procedures if needed. The clutch actuator cylinder must be placed correctly before following the fastener notice in service precautions. After securing the clutch actuator cylinder bolts at 8 nm torque (71 inch lbs.) finish by reattaching the manual transmission.
Slave Cylinder
20958083
Q: How to replace the Clutch Slave Cylinder in NV3500/NV4500 Transmissions on Chevrolet Silverado 1500?
A:
In order to replace clutch actuator cylinder in nv3500/nv4500 transmissions remove the manual transmission first. Take out the clutch actuator cylinder bolts, and remove the clutch actuator cylinder next. If necessary, the clutch Release Bearing can be unbolted from the clutch actuator cylinder if exchanging it. Installation should start with the clutch actuator cylinder, you follow the fastener notice in service precautions. Then, install the clutch actuator cylinder bolts and tighten to 8 nm (71 inch lbs) and finally install the manual transmission.