Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 24264181
Slave Cylinder

2003-2007 GM

Customer Questions & Expert Answers (9)
GM 24264181 Slave Cylinder
GM 24264181 Slave Cylinder
GM 24264181 Slave Cylinder
GM 24264181 Slave Cylinder
  • Part Description
    Cylinder Assembly, Clutch Actuator; Clutch Slave Cylinder
  • Replaces
    12573664, 24235621
  • Manufacturer
    General Motors
Make sure this part fits
$216.41 MSRP: $340.52
You Save: $124.11 (37%)
Ships in 1-3 Business Days
1
ADD TO CART

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24264181 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24264181 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Clutch Slave Cylinder in NV3500/NV4500 Transmissions on Chevrolet Silverado 2500? Posted by Customer
    A:
    In order to replace clutch actuator cylinder in nv3500/nv4500 transmissions remove the manual transmission first. Take out the clutch actuator cylinder bolts, and remove the clutch actuator cylinder next. If necessary, the clutch Release Bearing can be unbolted from the clutch actuator cylinder if exchanging it. Installation should start with the clutch actuator cylinder, you follow the fastener notice in service precautions. Then, install the clutch actuator cylinder bolts and tighten to 8 nm (71 inch lbs) and finally install the manual transmission.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Clutch Slave Cylinder in NV3500/NV4500 Transmissions on Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    The process starts by extracting the manual transmission from nv3500/nv4500 transmissions. The process starts by disassembling the clutch actuator cylinder bolts before finally removing the clutch actuator cylinder from the transmission unit. The clutch Release Bearing may be separated from the clutch actuator cylinder if the replacement requires removal of this component from the cylinder. Position the clutch actuator cylinder according to the fastener notice during installation procedures. Install the manual transmission after securing the clutch actuator cylinder bolts with 8 nm (71 inch lbs.) torque.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service the Clutch Slave Cylinder on the ZF S6-650 Transmission on Chevrolet Silverado 3500? Posted by Customer
    A:
    When servicing the Clutch Slave Cylinder for zf s6-650 transmission start by removing all manual transmission components. First disconnect clutch actuator cylinder bolts before you remove the clutch actuator cylinder. The clutch Release Bearing can be separated from the clutch actuator cylinder during replacement procedures if needed. The clutch actuator cylinder must be placed correctly before following the fastener notice in service precautions. After securing the clutch actuator cylinder bolts at 8 nm torque (71 inch lbs.) finish by reattaching the manual transmission.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Clutch Slave Cylinder in NV3500/NV4500 Transmissions on GMC Sierra 1500 Classic? Posted by Customer
    A:
    The process starts by extracting the manual transmission from nv3500/nv4500 transmissions. The process starts by disassembling the clutch actuator cylinder bolts before finally removing the clutch actuator cylinder from the transmission unit. The clutch Release Bearing may be separated from the clutch actuator cylinder if the replacement requires removal of this component from the cylinder. Position the clutch actuator cylinder according to the fastener notice during installation procedures. Install the manual transmission after securing the clutch actuator cylinder bolts with 8 nm (71 inch lbs.) torque.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service the Clutch Slave Cylinder on the ZF S6-650 Transmission on GMC Sierra 3500? Posted by Customer
    A:
    When servicing the Clutch Slave Cylinder for zf s6-650 transmission start by removing all manual transmission components. First disconnect clutch actuator cylinder bolts before you remove the clutch actuator cylinder. The clutch Release Bearing can be separated from the clutch actuator cylinder during replacement procedures if needed. The clutch actuator cylinder must be placed correctly before following the fastener notice in service precautions. After securing the clutch actuator cylinder bolts at 8 nm torque (71 inch lbs.) finish by reattaching the manual transmission.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service the Clutch Slave Cylinder on the ZF S6-650 Transmission on GMC Sierra 1500? Posted by Customer
    A:
    When servicing the Clutch Slave Cylinder for zf s6-650 transmission start by removing all manual transmission components. First disconnect clutch actuator cylinder bolts before you remove the clutch actuator cylinder. The clutch Release Bearing can be separated from the clutch actuator cylinder during replacement procedures if needed. The clutch actuator cylinder must be placed correctly before following the fastener notice in service precautions. After securing the clutch actuator cylinder bolts at 8 nm torque (71 inch lbs.) finish by reattaching the manual transmission.
    Posted by ChevyPartsGiant Specialist
    Q:
    Is there anything that can be detached from the clutch actuator cylinder for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Yes, if necessary, the clutch release bearing can be detached from the clutch actuator cylinder for replacement.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Slave Cylinder
    Q:
    What is the first step in the installation process for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Position the clutch actuator cylinder and ensure to adhere to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Slave Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Slave Cylinder 24264181 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 24264181 Slave Cylinder is available in the market under the name GM Clutch Slave Cylinder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 24264181 Slave Cylinder fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 24264181 maintains top performance when functioning as the Cylinder Assembly, Clutch Actuator; Clutch Slave Cylinder unit. The component 24264181 is constructed from durable material and its dimensions span 12.1 x 9.7 x 5.5 inches while weighing 1.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Cylinder, Clutch Hydraulic Release Slave/Actuator. The part 24264181 has available replacement options 12573664, 24235621. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.