Other Name: Motor Kit, Front Side Door Window Regulator; Motor Kit, Door And End Gate Electrical; Motor Kit, Front Door Window Regulator; Motor Kit, Rear Door Window Regulator
Position: Front Driver Side
Replaces: 88981018
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2007 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Motor Kit, Front Side Door Window Regulator; Motor Kit, Door And End Gate Electrical; Motor Kit, Front Door Window Regulator; Motor Kit, Rear Door Window Regulator
Position: Front Passenger Side
Replaces: 88981019
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2007 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Motor, Door And End Gate Electrical; Window Regulator; Motor
Position: Passenger Side
Replaces: 89044537, 88937200
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2007 Chevrolet Silverado 1500 | Base, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
| Page 1 of 2 |Next >
1-20 of 21 Results
Chevrolet Silverado 1500 Window Motor
Our website offers an extensive catalog of genuine Chevrolet Silverado 1500 Window Motor at unbeatable prices. Every OEM Chevrolet Silverado 1500 Window Motor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Silverado 1500 Window Motor Parts Questions & Experts Answers
Q: How to replace the front door window motor on Chevrolet Silverado 1500?
A: The first step to replace the front door Window Motor involves initially raising the window before uninstalling it if the motor proves unoperable. The next step includes taking out the door trim panel together with water deflector and door speaker before supporting the window. Disconnect the wiring harness from the Window Motor then remove three bolts that secure the motor until the cable gear stays within the housing. The Window Motor requires finger motion separation from its cable holder while remembering its positioning before being extracted from the door regulator assembly. Wiggle the motor into its housing then add the 3 bolts to fasten it to the Window Motor before torquing them to 5 n.m (44 lb in). Reinstall the missing window before you connect the wiring harness to the Window Motor. To check the window operation, disconnect the window support then link the wire connector to the switch before performing the inspection. Reconnect the wiring harness afterwards. Reposition the speaker before you reconnect both it and the water deflector and the door trim panel.