How to Replace the Motor and Transmission Mount on an Automatic Transmission - 4L80-E/4L85-E on Chevrolet Silverado 2500?

To replace the transmission mount on an automatic transmission - 4l80-e/4l85-e, first lift and support the vehicle, and then to support the transmission using a transmission jack. Take off the transmission mount to the transmission support retaining nut or nuts and lift up the transmission to relieve the load from the mount. Then take off the transmission mount and the transmission mount's bolts that connect between the transmission and transfer case adapter, and lift the transmission high enough to remove the transmission mount from the car. For installation, place the transmission mount back onto the vehicle and bolt the transmission mount to the transmission or the transfer case adapter mounting screws with a 50nm (37 ft. Lbs.). Reduce the transmission and install it to the transmission support retaining nut or nuts and tighten the nuts to 40 nm (30 ft. Lbs.). Finally, take off the transmission jack and lift the vehicle.

OEM Chevrolet Silverado 2500 Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Motor And Transmission Mounts found

View related parts
Chevrolet Silverado 2500 Transmission Mount
Part Number: 15820075
$24.09 MSRP: $41.02
You Save: $16.93 (42%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Transmission Mount Bracket; Mount
- Replaces: 09767961, 15788795, 22145802, 22146231, 22111702, 9767961, 10001752, 14063010, 15753648, 22179377, 22201140, 22146106, 22111912
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004, 1999-2002 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Motor Mount, Green
Part Number: 25828247
$118.02 MSRP: $202.70
You Save: $84.68 (42%)
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Front Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Replaces: 15036533, 15226253, 15919101, 15226252, 15829212, 15743846
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Transmission Mount
Part Number: 15788797
$47.71 MSRP: $81.23
You Save: $33.52 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Transfer Case Mount
- Replaces: 15768333
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003 Chevrolet Silverado 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Transmission Mount
Part Number: 15113134
$88.61 MSRP: $150.87
You Save: $62.26 (42%)
ADD TO CART
Product Specifications
- Other Name: Trans Mount; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount; Mount, Transmission Mounting
- Replaces: 15750514, 15683966, 15022551
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Mount Bracket, Driver Side
Part Number: 15036527
Product Specifications
- Other Name: Bracket Assembly; Engine Mount Bracket; Motor Mount; Bracket, Engine Mounting
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2002 Chevrolet Silverado 2500 | Base, LS, LT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS

Chevrolet Silverado 2500 Motor And Transmission Mount

Our website offers an extensive catalog of genuine Chevrolet Silverado 2500 Motor And Transmission Mount at unbeatable prices. Every OEM Chevrolet Silverado 2500 Motor And Transmission Mount comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 2500 Motor And Transmission Mount Parts Questions & Experts Answers

Transmission Mount
15113134
Q: How to Replace the Motor and Transmission Mount on an Automatic Transmission - 4L80-E/4L85-E on Chevrolet Silverado 2500?
A: To replace the transmission mount on an automatic transmission - 4l80-e/4l85-e, first lift and support the vehicle, and then to support the transmission using a transmission jack. Take off the transmission mount to the transmission support retaining nut or nuts and lift up the transmission to relieve the load from the mount. Then take off the transmission mount and the transmission mount's bolts that connect between the transmission and transfer case adapter, and lift the transmission high enough to remove the transmission mount from the car. For installation, place the transmission mount back onto the vehicle and bolt the transmission mount to the transmission or the transfer case adapter mounting screws with a 50nm (37 ft. Lbs.). Reduce the transmission and install it to the transmission support retaining nut or nuts and tighten the nuts to 40 nm (30 ft. Lbs.). Finally, take off the transmission jack and lift the vehicle.