Other Name: Pad, Driver Seat Back Cushion; Pad, Ae7 - Front Split Bench (Except "D" Trim); Pad, Ae7 - Front Split Bench ("D" Trim); Pad, Seat Back Cushion
Position: Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2002 Chevrolet Silverado 2500 | Base, LS, LT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
| Page 1 of 2 |Next >
1-20 of 26 Results
Chevrolet Silverado 2500 Seat Cushion Pad
Our website offers an extensive catalog of genuine Chevrolet Silverado 2500 Seat Cushion Pad at unbeatable prices. Every OEM Chevrolet Silverado 2500 Seat Cushion Pad comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Silverado 2500 Seat Cushion Pad Parts Questions & Experts Answers
Q: How to replace the rear seat back cover and Seat Cushion Pad on Chevrolet Silverado 2500?
A: The replacement starts by extracting the rear seat before proceeding to remove any seat back folding cover present and detaching any seat back armrest components. The second step requires the removal of head restraints from the seat back followed by j-clip removal from the seat back cover. The hook-and-loop strips require removal to let go of the cover from the foam pad arrangement. Using cardboard pieces you must slide under the foam pad from its sides to easily remove the seat back cover after safely lifting it from the pad. You should install the seat back cover by putting it on the foam pad while removing the cardboard before connecting its hook and loop retention system. First secure the j-clips which fasten the seat back cover and then reinstall the head restraints to the seat back. Reattach the armrest if it was dismounted followed by installation of the seat back folding cover before finally putting back the rear seat inside the vehicle.