How to replace the outer rack and pinion tie rod end on Chevrolet Silverado 2500?

The procedure to replace an outer rack and pinion Tie Rod End begins with vehicle lifting and appropriate safety stand implementation. Start by removing the tire and wheel assembly followed by the torque prevailing nut from the outer tie rod stud. The universal steering linkage puller (J 24319-01) should be applied for outer tie rod assembly removal from the Steering Knuckle after users loosen the inner tie rod assembly jam nut. The second step involves removing the outer tie rod assembly from its connection to the inner tie rod assembly. The outer tie rod assembly should be connected to the inner tie rod where the jam nut needs to stay loose. Its time to put the tie rod seal onto the outer tie rod assembly before connecting this assembly to the Steering Knuckle. Use the torque prevailing nut to fasten the outer tie rod stud while torquing it to 50 nm (37 ft.lbs.). Before closing the system verify that the Rack and Pinion Boot remains untwisted after toe adjustment and perform wheel alignment testing.

OEM Chevrolet Silverado 2500 Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Tie Rod Ends found

View related parts
Chevrolet Silverado 2500 Outer Tie Rod
Part Number: 19352244
$98.58 MSRP: $154.42
You Save: $55.84 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaced by: 85819772
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Outer Tie Rod
Part Number: 26076544
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Outer Tie Rod
Part Number: 19149617
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 12471376
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chevrolet Silverado 2500 | Base, LS, LT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet Silverado 2500 Tie Rod End

Our website offers an extensive catalog of genuine Chevrolet Silverado 2500 Tie Rod End at unbeatable prices. Every OEM Chevrolet Silverado 2500 Tie Rod End comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 2500 Tie Rod End Parts Questions & Experts Answers

Outer Tie Rod
19352244
Q: How to replace the outer rack and pinion tie rod end on Chevrolet Silverado 2500?
A: The procedure to replace an outer rack and pinion Tie Rod End begins with vehicle lifting and appropriate safety stand implementation. Start by removing the tire and wheel assembly followed by the torque prevailing nut from the outer tie rod stud. The universal steering linkage puller (J 24319-01) should be applied for outer tie rod assembly removal from the Steering Knuckle after users loosen the inner tie rod assembly jam nut. The second step involves removing the outer tie rod assembly from its connection to the inner tie rod assembly. The outer tie rod assembly should be connected to the inner tie rod where the jam nut needs to stay loose. Its time to put the tie rod seal onto the outer tie rod assembly before connecting this assembly to the Steering Knuckle. Use the torque prevailing nut to fasten the outer tie rod stud while torquing it to 50 nm (37 ft.lbs.). Before closing the system verify that the Rack and Pinion Boot remains untwisted after toe adjustment and perform wheel alignment testing.