How to replace the engine flywheel on Chevrolet Silverado 3500 Classic?

The replacement of the engine Flywheel begins with automatic transmission removal followed by correct documentation of engine Flywheel orientation. After separating the Flywheel bolts you should proceed to remove both the bolts and the Flywheel. The rear Crankshaft spacer can be extracted when you insert two m11x1.5 mm bolts into its threaded holes and rotate them clockwise. The installation procedure requires placing the spacer onto the Crankshaft rear and afterwards installing the Flywheel and bolts to the Crankshaft but use extended Flywheel bolts when a spacer exists. The correct threadlock part number must be used to cover the Flywheel bolt threads. Apply this threadlock compound before fastening the bolts. Follow this procedure to install the Flywheel bolts by applying torque of 20 nm (15 ft. Lbs.) first followed by 50 nm (37 ft. Lbs.) then finally ending with 100 nm (74 ft. Lbs.). Reinstallation of the automatic transmission should follow these installation procedures.

OEM Chevrolet Silverado 3500 Classic Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Flywheels found

View related parts
Chevrolet Silverado 3500 Classic Drive Plate
Part Number: 12654640
$129.25 MSRP: $221.97
You Save: $92.72 (42%)
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft; Flywheel
- Replaces: 12553054, 12602448, 12606620, 12637677, 12563136, 12580709
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 3500 Classic Drive Plate
Part Number: 12621399
$84.92 MSRP: $145.86
You Save: $60.94 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 19260102
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 3500 Classic Flywheel
Part Number: 12561680
$380.97 MSRP: $599.45
You Save: $218.48 (37%)
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 3500 Classic Drive Plate
Part Number: 12561217
$378.22 MSRP: $595.10
You Save: $216.88 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Classic Drive Plate
Part Number: 97372295
$412.56 MSRP: $649.14
You Save: $236.58 (37%)
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Silverado 3500 Classic Drive Plate
Part Number: 19117204
Product Specifications
- Other Name: Plate Assembly, Automatic Transmission Flexible; Rotor Plate; Plate, Engine Crankshaft
- Replaces: 12569647
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS

Chevrolet Silverado 3500 Classic Flywheel

Our website offers an extensive catalog of genuine Chevrolet Silverado 3500 Classic Flywheel at unbeatable prices. Every OEM Chevrolet Silverado 3500 Classic Flywheel comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 3500 Classic Flywheel Parts Questions & Experts Answers

Drive Plate
12561217
Q: How to replace the engine flywheel on Chevrolet Silverado 3500 Classic?
A: The replacement of the engine Flywheel begins with automatic transmission removal followed by correct documentation of engine Flywheel orientation. After separating the Flywheel bolts you should proceed to remove both the bolts and the Flywheel. The rear Crankshaft spacer can be extracted when you insert two m11x1.5 mm bolts into its threaded holes and rotate them clockwise. The installation procedure requires placing the spacer onto the Crankshaft rear and afterwards installing the Flywheel and bolts to the Crankshaft but use extended Flywheel bolts when a spacer exists. The correct threadlock part number must be used to cover the Flywheel bolt threads. Apply this threadlock compound before fastening the bolts. Follow this procedure to install the Flywheel bolts by applying torque of 20 nm (15 ft. Lbs.) first followed by 50 nm (37 ft. Lbs.) then finally ending with 100 nm (74 ft. Lbs.). Reinstallation of the automatic transmission should follow these installation procedures.