How to replace the Power Steering Hose for the rack and pinion on Chevrolet Silverado 3500 Classic?

The replacement process of Power Steering Cooler pipe/hose requires front grille removal as the first step. The power steering outlet hose connected to the power steering gear and the power steering inlet hose attached to the Power Steering Pump must be removed first. After you detach the bolts which hold the cooler to the radiator support you can remove the Power Steering Cooler unit from your car. The Power Steering Cooler installation requires securing it to the vehicle by tightening bolts to 5 nm (44 inch lbs.). Apply the power steering inlet hose to the Power Steering Pump before installing its retaining clamp. After attaching the power steering outlet hose to the power steering gear you must place the retaining clamp. Inspection for power steering system bleeding and leak testing of all hoses must happen before reinstalling the front grille.

OEM Chevrolet Silverado 3500 Classic Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Power Steering Hoses found

View related parts
Chevrolet Silverado 3500 Classic Outlet Pipe
Part Number: 23251100
$19.87 MSRP: $32.73
You Save: $12.86 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Power Steering Gear Outlet; Power Steering Hose; Return Hose; Return Pipe; Pipe, Steering Gear Oil Return
- Replaces: 15295836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Classic Power Steering Pressure Hose
Part Number: 15295838
$49.42 MSRP: $84.13
You Save: $34.71 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hoses; Hose, Hydraulic Steering Gear Pressure
- Replaces: 26051189
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Classic Power Steering Pressure Hose
Part Number: 26071669
$65.00 MSRP: $110.67
You Save: $45.67 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Pressure Hose
- Replaced by: 15295840
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS

Chevrolet Silverado 3500 Classic Power Steering Hose

Our website offers an extensive catalog of genuine Chevrolet Silverado 3500 Classic Power Steering Hose at unbeatable prices. Every OEM Chevrolet Silverado 3500 Classic Power Steering Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 3500 Classic Power Steering Hose Parts Questions & Experts Answers

Outlet Pipe
23251100
Q: How to replace the Power Steering Hose for the rack and pinion on Chevrolet Silverado 3500 Classic?
A: The replacement process of Power Steering Cooler pipe/hose requires front grille removal as the first step. The power steering outlet hose connected to the power steering gear and the power steering inlet hose attached to the Power Steering Pump must be removed first. After you detach the bolts which hold the cooler to the radiator support you can remove the Power Steering Cooler unit from your car. The Power Steering Cooler installation requires securing it to the vehicle by tightening bolts to 5 nm (44 inch lbs.). Apply the power steering inlet hose to the Power Steering Pump before installing its retaining clamp. After attaching the power steering outlet hose to the power steering gear you must place the retaining clamp. Inspection for power steering system bleeding and leak testing of all hoses must happen before reinstalling the front grille.