Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2003-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
| Page 1 of 2 |Next >
1-20 of 23 Results
Chevrolet Silverado 3500 Seat Cushion Pad
Our website offers an extensive catalog of genuine Chevrolet Silverado 3500 Seat Cushion Pad at unbeatable prices. Every OEM Chevrolet Silverado 3500 Seat Cushion Pad comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Silverado 3500 Seat Cushion Pad Parts Questions & Experts Answers
Q: How to Replace a Rear Seat Cushion Pad and Cover on Chevrolet Silverado 3500?
A: The first step to replace the rear seat cushion cover and pad is to remove the rear seat from the vehicle and the rear passenger seat riser. The next step requires removal of hog rings or J-clips from the rear seat cushion cover edges while completing the disconnection process for the rear heater connector. The repair process starts by taking out seat belt buckles together with all remaining hog rings or J-clips that hold the seat cushion cover to the seat cushion frame . To remove the seat cushion cover from the foam pad begin by releasing the hook and loop-strips securing it to the pad then detach the center screw securing the latch cover if equipped. Install the seat cushion cover onto the foam pad by following the fastener notice in service precautions. Affix the center screw on the latch cover while tightening it to 2 N.m (18 lb in) and press the hook and loop-strips into place that attach the seat cushion cover to the foam pad. The buckles of the seat must be installed after completing the process and you should connect the rear heater connector if your car comes with this feature. The last step includes fixing the seat cushion cover to the frame using hog rings and J-clips while reattaching the rear seat risers and setting the rear seat in position.