How to replace a wiper arm on Chevrolet Silverado 3500?

The replacement process for wiper arms begins by marking the initial position of the Wiper Blade on the windshield with a marker while using tape for protection and continuing by removing the washer hose. Use a wrench to remove the nut which protects the Wiper Arm before continuing with installation. Use a battery terminal puller to separate the Wiper Arm from the Drive Shaft before using a wire brush to clean the Drive Shaft knurls. Put the Wiper Arm into place by aligning the Wiper Blade with the windshield mark and put the Wiper Arm onto the Drive Shaft. Fasten the Drive Shaft's nut then apply 30 n.m of torque to reach 22 lb ft. To complete this process you must first install the cover on the nut then reconnect the washer hose before cleaning the locating mark or masking tape residue from the windshield. Before concluding check for correct Wiper Blade function.

OEM Chevrolet Silverado 3500 Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wiper Arms found

View related parts
Chevrolet Silverado 3500 Wiper Arm, Passenger Side
Part Number: 15829647
$35.14 MSRP: $54.85
You Save: $19.71 (36%)
ADD TO CART
Product Specifications
- Other Name: Arm, Windshield Wiper; Arm, Windshield Wiper Transmission
- Position: Passenger Side
- Replaces: 88937402, 10367563, 15114472
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Wiper Arm, Passenger Side
Part Number: 15761496
$40.01 MSRP: $70.24
You Save: $30.23 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Windshield Wiper; Arm, Windshield Wiper Transmission
- Position: Passenger Side
- Replaces: 12487596, 12368670, 15706392
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet Silverado 3500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Wiper Arm, Driver Side
Part Number: 15829648
$35.18 MSRP: $62.83
You Save: $27.65 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Windshield Wiper; Arm, Windshield Wiper Transmission
- Position: Driver Side
- Replaces: 15139553, 15114471, 88958115
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Wiper Arm, Driver Side
Part Number: 15761497
$37.09 MSRP: $66.24
You Save: $29.15 (45%)
Product Specifications
- Other Name: Arm, Windshield Wiper; Arm, Windshield Wiper Transmission
- Position: Driver Side
- Replaces: 12487597, 15706391, 12368669
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet Silverado 3500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS

Chevrolet Silverado 3500 Wiper Arm

Our website offers an extensive catalog of genuine Chevrolet Silverado 3500 Wiper Arm at unbeatable prices. Every OEM Chevrolet Silverado 3500 Wiper Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 3500 Wiper Arm Parts Questions & Experts Answers

Wiper Arm, Driver Side
15829648
Q: How to replace a wiper arm on Chevrolet Silverado 3500?
A: The replacement process for wiper arms begins by marking the initial position of the Wiper Blade on the windshield with a marker while using tape for protection and continuing by removing the washer hose. Use a wrench to remove the nut which protects the Wiper Arm before continuing with installation. Use a battery terminal puller to separate the Wiper Arm from the Drive Shaft before using a wire brush to clean the Drive Shaft knurls. Put the Wiper Arm into place by aligning the Wiper Blade with the windshield mark and put the Wiper Arm onto the Drive Shaft. Fasten the Drive Shaft's nut then apply 30 n.m of torque to reach 22 lb ft. To complete this process you must first install the cover on the nut then reconnect the washer hose before cleaning the locating mark or masking tape residue from the windshield. Before concluding check for correct Wiper Blade function.