Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15829648
Wiper Arm, Driver Side

2002-2007 GM

Customer Questions & Expert Answers (15)
GM 15829648 Wiper Arm, Driver Side
GM 15829648 Wiper Arm, Driver Side
GM 15829648 Wiper Arm, Driver Side
  • Part Description
    Arm, Windshield Wiper
  • Position
    Driver Side
  • Replaces
    15139553, 15114471, 88958115
  • Manufacturer
    General Motors
Make sure this part fits
$35.18 MSRP: $62.83
You Save: $27.65 (45%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 15829648 Wiper Arm, Driver Side is Ref No. 1 in the diagram below

    2004 Chevy Silverado 1500 Wiper Arm, Driver Side Diagram for 15829648
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15829648

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15829648
    Part DescriptionArm, Windshield Wiper
    Other NamesArm, Windshield Wiper Transmission
    Item Dimensions31.2 x 6.1 x 6.2 inches
    Item Weight1.80 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15139553, 15114471, 88958115
    ManufacturerGeneral Motors
    SKU15829648
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    View More

  • Customer Questions & Expert Answers

    Q:
    Is this 15829648 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15829648 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear wiper arm on Cadillac Escalade EXT? Posted by Customer
    A:
    Before you remove the wiper you need to record where the wiper sits on the glass. Disconnect the washer hose and swing open the Wiper Arm cover before you remove the Wiper Arm retaining nut (Wiper Arm Nut - 115 200 01). Insert the new Wiper Arm into position on the vehicle before tightening the Wiper Motor securing nut (Wiper Arm Nut - 115 200 01) to 23 n.m (17 lb ft). After placing the Wiper Arm cover back in its position and reconnecting the washer hose the user should test the rear wiper to ensure correct operation.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wiper arm on Chevrolet Avalanche 1500? Posted by Customer
    A:
    Start the Wiper Arm replacement by placing a mark on the windshield with a marker or tape where the Wiper Blade is, then disconnect the washer hose. Pull off the cover on the Wiper Arm's nut, unscrew the nut, and then take off the Wiper Arm from the Drive Shaft with a battery terminal puller. Take a wire brush and clean the Drive Shaft knurls. Position the Wiper Arm onto the windshield so the blade matches the mark and install the arm onto the Drive Shaft, putting the nut on and tightening it to 30 n.m as the fastener notice says. Make sure to replace the nut cover, reattach the washer hose, take off the locating mark or tape from the windshield, and then run the wipers to make sure they operate as expected.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a wiper arm on Chevrolet Avalanche 2500? Posted by Customer
    A:
    Begin Wiper Arm replacement by marking the blade location with tape and unfastening the washing hose before lifting the trim from the wiper motor. Unscrew the Wiper Arm's cover nut before removing the nut. A battery terminal puller helps detach the Wiper Arm from the Drive Shaft before you can remove the Wiper Arm itself from the Drive Shaft and clean its knurls using a wire brush. Align the Wiper Blade with the mark you made previously on the windshield before you put the Wiper Arm onto the Drive Shaft. Drive shaft installation requires a nut fastening that reaches 30 n.m (22 lb ft) torque. When done install the cover on the nut while reattaching the washer hose and cleaning the locating mark or masking tape from the windshield before operating the wipers for a functionality check.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a wiper arm on Chevrolet Silverado 3500? Posted by Customer
    A:
    The replacement process for wiper arms begins by marking the initial position of the Wiper Blade on the windshield with a marker while using tape for protection and continuing by removing the washer hose. Use a wrench to remove the nut which protects the Wiper Arm before continuing with installation. Use a battery terminal puller to separate the Wiper Arm from the Drive Shaft before using a wire brush to clean the Drive Shaft knurls. Put the Wiper Arm into place by aligning the Wiper Blade with the windshield mark and put the Wiper Arm onto the Drive Shaft. Fasten the Drive Shaft's nut then apply 30 n.m of torque to reach 22 lb ft. To complete this process you must first install the cover on the nut then reconnect the washer hose before cleaning the locating mark or masking tape residue from the windshield. Before concluding check for correct Wiper Blade function.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a wiper arm on Chevrolet Silverado 1500? Posted by Customer
    A:
    The replacement process for wiper arms begins by marking the initial position of the Wiper Blade on the windshield with a marker while using tape for protection and continuing by removing the washer hose. Use a wrench to remove the nut which protects the Wiper Arm before continuing with installation. Use a battery terminal puller to separate the Wiper Arm from the Drive Shaft before using a wire brush to clean the Drive Shaft knurls. Put the Wiper Arm into place by aligning the Wiper Blade with the windshield mark and put the Wiper Arm onto the Drive Shaft. Fasten the Drive Shaft's nut then apply 30 n.m of torque to reach 22 lb ft. To complete this process you must first install the cover on the nut then reconnect the washer hose before cleaning the locating mark or masking tape residue from the windshield. Before concluding check for correct Wiper Blade function.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wiper arm on Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Before you replace the Wiper Arm, put a marker or masking tape on the Wiper Blade's spot, and then disconnect the washer hose. Take off the cover that is on the Wiper Arm nut, then unscrew the nut. Make sure to use a battery terminal puller to take off the Wiper Arm from the Drive Shaft, after which you should use a wire brush to clean the knurls. Place the Wiper Arm so the blade lines up with your previous mark before putting it onto the Drive Shaft to install it. Add the nut to the Drive Shaft, tighten it with 30 n.m (22 lb ft) force, then put the cover back on and attach the washer hose. When you are done, take off the locating mark or masking tape from the windshield and test the wipers to ensure they work well.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a wiper arm on Chevrolet Silverado 2500? Posted by Customer
    A:
    The replacement process for wiper arms begins by marking the initial position of the Wiper Blade on the windshield with a marker while using tape for protection and continuing by removing the washer hose. Use a wrench to remove the nut which protects the Wiper Arm before continuing with installation. Use a battery terminal puller to separate the Wiper Arm from the Drive Shaft before using a wire brush to clean the Drive Shaft knurls. Put the Wiper Arm into place by aligning the Wiper Blade with the windshield mark and put the Wiper Arm onto the Drive Shaft. Fasten the Drive Shaft's nut then apply 30 n.m of torque to reach 22 lb ft. To complete this process you must first install the cover on the nut then reconnect the washer hose before cleaning the locating mark or masking tape residue from the windshield. Before concluding check for correct Wiper Blade function.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wiper arm on Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Before you replace the Wiper Arm, put a marker or masking tape on the Wiper Blade's spot, and then disconnect the washer hose. Take off the cover that is on the Wiper Arm nut, then unscrew the nut. Make sure to use a battery terminal puller to take off the Wiper Arm from the Drive Shaft, after which you should use a wire brush to clean the knurls. Place the Wiper Arm so the blade lines up with your previous mark before putting it onto the Drive Shaft to install it. Add the nut to the Drive Shaft, tighten it with 30 n.m (22 lb ft) force, then put the cover back on and attach the washer hose. When you are done, take off the locating mark or masking tape from the windshield and test the wipers to ensure they work well.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wiper arm on GMC Sierra 3500? Posted by Customer
    A:
    Before replacing the Wiper Arm you need to position the Wiper Blade on the windshield using a marker or tape to mark the spot. Then detach the washer hose. To replace the Wiper Arm you need to remove the nut cover and then take off the nut with the Wiper Arm from the Drive Shaft using a battery terminal puller tool. Scrub the Drive Shaft knurls with a wire brush to clean them. Insert the Wiper Arm until the blade touches the mark you placed earlier on the windshield. Then attach the Wiper Arm to the Drive Shaft by hand and secure it with the nut at 30 n.m (22 lb ft). Attach the nut cover and reconnect the washer hose while clearing the windshield mark or masking tape and testing the wiper system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wiper arm on GMC Sierra 1500 Classic? Posted by Customer
    A:
    Before you replace the Wiper Arm, put a marker or masking tape on the Wiper Blade's spot, and then disconnect the washer hose. Take off the cover that is on the Wiper Arm nut, then unscrew the nut. Make sure to use a battery terminal puller to take off the Wiper Arm from the Drive Shaft, after which you should use a wire brush to clean the knurls. Place the Wiper Arm so the blade lines up with your previous mark before putting it onto the Drive Shaft to install it. Add the nut to the Drive Shaft, tighten it with 30 n.m (22 lb ft) force, then put the cover back on and attach the washer hose. When you are done, take off the locating mark or masking tape from the windshield and test the wipers to ensure they work well.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a wiper arm on GMC Sierra 1500? Posted by Customer
    A:
    The replacement process for wiper arms begins by marking the initial position of the Wiper Blade on the windshield with a marker while using tape for protection and continuing by removing the washer hose. Use a wrench to remove the nut which protects the Wiper Arm before continuing with installation. Use a battery terminal puller to separate the Wiper Arm from the Drive Shaft before using a wire brush to clean the Drive Shaft knurls. Put the Wiper Arm into place by aligning the Wiper Blade with the windshield mark and put the Wiper Arm onto the Drive Shaft. Fasten the Drive Shaft's nut then apply 30 n.m of torque to reach 22 lb ft. To complete this process you must first install the cover on the nut then reconnect the washer hose before cleaning the locating mark or masking tape residue from the windshield. Before concluding check for correct Wiper Blade function.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after noting the wiper's location for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Disconnect the washer hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done after marking the position for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Disconnect the washer hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done to the drive shaft before installation for the 2006 GMC Yukon? Posted by Customer
    A:
    Clean the knurls of the drive shaft with a wire brush.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15829648, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15829648 Wiper Arm, Driver Side. It is sometimes referred to as GM Windshield Wiper, GM Wiper Arm. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15829648 Wiper Arm, Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery