How to replace the MAP Sensor on Chevrolet Suburban 2500?

Begin MAP Sensor replacement by unscrewing the fastener holding the Intake Manifold sight shield then removing this shield from the Intake Manifold. To remove the MAP Sensor you should disconnect its electrical connector then unfasten the retaining bolt together with the washer before pulling out the sensor from the Intake Manifold. Examine the MAP Sensor seal for evidence of damage or wear and get a new MAP Sensor if needed. When replacing the new MAP Sensor it is necessary to apply a thin layer of rubber lubricant (part number 9985770) using a brush or sponge on the sensor's seal. This application needs to be done without submerging the sensor port to avoid blockages. Tighten the fastener to 12 n.m (106 lb in) after installing the MAP Sensor through its retaining bolt and washer . The MAP Sensor must be connected electrically after inserting it into position followed by reattaching the Intake Manifold sight shield with a 10 n.m (89 lb in) torque specification.

OEM Chevrolet Suburban 2500 MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
Chevrolet Suburban 2500 Throttle Position Sensor
Part Number: 12711681
$45.69 MSRP: $92.78
You Save: $47.09 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; M.A.P. Sensor; Pressure Sensor; Boost Sensor; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12694725, 12644228, 12594942, 12701247
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 M.A.P. Sensor
Part Number: 19418808
$73.36 MSRP: $143.62
You Save: $70.26 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2009 Chevrolet Suburban 2500 | Base, LS, LT, LTZ | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS

Chevrolet Suburban 2500 MAP Sensor

Our website offers an extensive catalog of genuine Chevrolet Suburban 2500 MAP Sensor at unbeatable prices. Every OEM Chevrolet Suburban 2500 MAP Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Suburban 2500 MAP Sensor Parts Questions & Experts Answers

M.A.P. Sensor
19418808
Q: How to replace the MAP Sensor on Chevrolet Suburban 2500?
A: Begin MAP Sensor replacement by unscrewing the fastener holding the Intake Manifold sight shield then removing this shield from the Intake Manifold. To remove the MAP Sensor you should disconnect its electrical connector then unfasten the retaining bolt together with the washer before pulling out the sensor from the Intake Manifold. Examine the MAP Sensor seal for evidence of damage or wear and get a new MAP Sensor if needed. When replacing the new MAP Sensor it is necessary to apply a thin layer of rubber lubricant (part number 9985770) using a brush or sponge on the sensor's seal. This application needs to be done without submerging the sensor port to avoid blockages. Tighten the fastener to 12 n.m (106 lb in) after installing the MAP Sensor through its retaining bolt and washer . The MAP Sensor must be connected electrically after inserting it into position followed by reattaching the Intake Manifold sight shield with a 10 n.m (89 lb in) torque specification.