How to replace the front seat cushion pad on Chevrolet Tracker?

The first step for replacing front seat cushions requires removing the front seating element. If the seat cushion supports a front seat belt buckle electrical connector it requires plastic retainers to be detached before proceeding. You need to remove four bolts which hold the seat cushion in place to the seat adjusters at positions 2 and 4. After flipping the front seat you must remove its seat cushion from the seat adjusters. The seat cushion assembly should be fitted by first placing it back onto the seat adjusters. Read and apply all procedures presented in the Fastener Notice section of Cautions and Notices. It is now time to reposition and fasten the 4 bolts (2, 4) which join the seat cushion to the seat adjusters through torquing them to 35 N.m (25 lb ft). The front seat belt buckle electrical connector needs to be connected to the seat cushion after which plastic retainers will protect this connection before the front seat is reinstalled.

How to replace the rear Seat Cushion Pad in a 2-door on Chevrolet Tracker?

Put the cover off each rear seat hinge support before starting to replace the rear seat cushion in a 2-door vehicle. First remove the rear seat stopper rod nut on each rear seat hinge support pin before taking out the support pin from each rear seat support. The installation begins with pulling the rear seat pull strap until you lift the back of the seat cushion before removing it from the car. Set the rear seat cushion inside the vehicle before using rear seat hinge support pins to fasten the seat to each rear seat support. Guidelines for assembly start with reattaching the rear seat stopper rod nut onto each support pin and ending with rear seat hinge support cover attachment onto each rear seat hinge support. Finally, lower the seat cushion.

OEM Chevrolet Tracker Seat Cushion Pad

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Seat Cushion Pads found

View related parts
Chevrolet Tracker Seat Back Pad Part Number: 91175021
Product Specifications
- Other Name: Back Sub Assembly, Rear, Left-Hand (On Esn); Pad, Seat Back Cushion
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Seat Back Pad Part Number: 91175020
Product Specifications
- Other Name: Pad, Seat Back Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2003 Chevrolet Tracker | Base, LSi, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Seat Back Pad Part Number: 91175019
Product Specifications
- Other Name: Pad, Seat Back Cushion
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Seat Cushion Pad Part Number: 91175008
Product Specifications
- Other Name: Pad, Seat Cushion; Seat Cushion
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Seat Cushion Pad Part Number: 91175007
Product Specifications
- Other Name: Pad, Seat Cushion; Seat Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2003 Chevrolet Tracker | Base, LSi, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Seat Cushion Pad Part Number: 91175006
Product Specifications
- Other Name: Pad, Seat Cushion; Seat Cushion
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Seat Cushion Pad Part Number: 91174981
Product Specifications
- Other Name: Pad; Seat Cushion; Pad, Seat Cushion
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Chevrolet Tracker Seat Cushion Pad

Want to cut long-term maintenance and repair costs? Choose OEM Seat Cushion Pad. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Tracker parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Tracker Seat Cushion Pad includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Tracker Seat Cushion Pad is an important part, which targets at improving the comfort the car interiors on long distances for different models of Chevrolet Tracker cars. Being highly reliable and recognized for its effectiveness, Seat Cushion Pad identifies such problems as poor support and a tendency to develop such symptoms as back pain and fatigue due to sitting. Two variants of this product are available with beads and sheepskin; the original Seat Cushion Pad is Beaded which enhances the air circulation and provides massage to improve blood circulation while the Sheepskin variant is outstanding in heat control as well as the presence of moisture. Another important component that ought to be included in the Chevrolet Tracker, a model mini SUV fawned for its off-road capacity, is the Seat Cushion Pad because it also offers optimal efficiency and safety in vehicular use by offering support to crucial body sections of the driver and other occupants. Fitment list can be described as extensive because it covers almost all Tracker models, which means that each Chevrolet Tracker owner can benefit from this great Seat Cushion Pad. Through the decision of defining the Chevrolet Tracker as a symbol of reliable mechanisms and materials and the careful design of Seat Cushion Pad as an improved comfort in the car, the positive aspect of the car stands out as uniqueness in the market. Finally, the Chevrolet Tracker Seat Cushion Pad takes the driving experience to the next level and, indeed, strengthens the Chevrolet Tracker's position as a car for cruising and going off-road.

Chevrolet Tracker Seat Cushion Pad Parts and Q&A

Seat Cushion Pad
91174981
Q: How to replace the front seat cushion pad on Chevrolet Tracker?
A:
The first step for replacing front seat cushions requires removing the front seating element. If the seat cushion supports a front seat belt buckle electrical connector it requires plastic retainers to be detached before proceeding. You need to remove four bolts which hold the seat cushion in place to the seat adjusters at positions 2 and 4. After flipping the front seat you must remove its seat cushion from the seat adjusters. The seat cushion assembly should be fitted by first placing it back onto the seat adjusters. Read and apply all procedures presented in the Fastener Notice section of Cautions and Notices. It is now time to reposition and fasten the 4 bolts (2, 4) which join the seat cushion to the seat adjusters through torquing them to 35 N.m (25 lb ft). The front seat belt buckle electrical connector needs to be connected to the seat cushion after which plastic retainers will protect this connection before the front seat is reinstalled.
Seat Back Pad
91175020
Q: How to replace the rear Seat Cushion Pad in a 2-door on Chevrolet Tracker?
A:
Put the cover off each rear seat hinge support before starting to replace the rear seat cushion in a 2-door vehicle. First remove the rear seat stopper rod nut on each rear seat hinge support pin before taking out the support pin from each rear seat support. The installation begins with pulling the rear seat pull strap until you lift the back of the seat cushion before removing it from the car. Set the rear seat cushion inside the vehicle before using rear seat hinge support pins to fasten the seat to each rear seat support. Guidelines for assembly start with reattaching the rear seat stopper rod nut onto each support pin and ending with rear seat hinge support cover attachment onto each rear seat hinge support. Finally, lower the seat cushion.

Related Chevrolet Tracker Parts

Browse Chevrolet Tracker Seat Cushion Pad by Years

2004 2003 2002 2001 2000 1999

OEM Chevrolet Tracker Seat Cushion Pad

7 Seat Cushion Pads found

Chevrolet Tracker Seat Back Pad Part Number: 91175021

Chevrolet Tracker Seat Back Pad Part Number: 91175020

Chevrolet Tracker Seat Back Pad Part Number: 91175019

Chevrolet Tracker Seat Cushion Pad Part Number: 91175008

Chevrolet Tracker Seat Cushion Pad Part Number: 91175007

Chevrolet Tracker Seat Cushion Pad Part Number: 91175006

Chevrolet Tracker Seat Cushion Pad Part Number: 91174981

Chevrolet Tracker Seat Cushion Pad

Chevrolet Tracker Seat Cushion Pad Parts and Q&A

Related Chevrolet Tracker Parts

Browse Chevrolet Tracker Seat Cushion Pad by Years