How to replace the Mass Air Flow Sensor with the Intake Air Temperature Sensor on Chevrolet Traverse?

The installation process for intake Air Temperature Sensor starts with removing the air cleaner outlet duct. First disconnect the engine wiring harness electrical connector from the Mass Air Flow Sensor/intake air temperature (IAT) sensor then take out the Mass Air Flow Sensor/iat sensor by removing its screws while moving the sensor from the air cleaner assembly. Next remove the Mass Air Flow Sensor/iat sensor seal. Before installing the Mass Air Flow Sensor/iat sensor attach its corresponding Mass Air Flow Sensor/iat sensor seal to the Mass Air Flow Sensor/iat sensor. Afterward replace the Mass Air Flow Sensor/iat sensor within the air cleaner assembly. Mount the Mass Air Flow Sensor/iat sensor screws into place before securing them to a torque of 4 nm (35 lb in). Connect the engine wiring harness electrical connector to the Mass Air Flow Sensor/iat sensor before putting back the air cleaner outlet duct.

OEM Chevrolet Traverse Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Mass Air Flow Sensors found

View related parts
Chevrolet Traverse Mass Air Flow Sensor
Part Number: 19355501
$109.91 MSRP: $206.40
You Save: $96.49 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Mass Airflow; Manifold Sensor Assembly; Air Mass Sensor; Sensor, Computer Control Sensors
- Replaces: 21994504
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Mass Air Flow Sensor
Part Number: 15875837
$84.10 MSRP: $236.78
You Save: $152.68 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Sensor Assembly; Manifold Sensor; Air Mass Sensor
- Replaced by: 19355502
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Mass Air Flow Sensor, Driver Side
Part Number: 23262343
$80.29 MSRP: $163.06
You Save: $82.77 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Mass Airflow; Manifold Sensor; Humidity Sensor; Pressure Sensor; Air Mass Sensor; Sensor, Computer Control Sensors
- Position: Driver Side
- Replaces: 20787043, 23118170
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2023 Chevrolet Traverse | High Country, L, LS, LT, LTZ, Premier, RS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS

Chevrolet Traverse Mass Air Flow Sensor

Our website offers an extensive catalog of genuine Chevrolet Traverse Mass Air Flow Sensor at unbeatable prices. Every OEM Chevrolet Traverse Mass Air Flow Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Traverse Mass Air Flow Sensor Parts Questions & Experts Answers

Mass Air Flow Sensor
15875837
Q: How to replace the Mass Air Flow Sensor with the Intake Air Temperature Sensor on Chevrolet Traverse?
A: The installation process for intake Air Temperature Sensor starts with removing the air cleaner outlet duct. First disconnect the engine wiring harness electrical connector from the Mass Air Flow Sensor/intake air temperature (IAT) sensor then take out the Mass Air Flow Sensor/iat sensor by removing its screws while moving the sensor from the air cleaner assembly. Next remove the Mass Air Flow Sensor/iat sensor seal. Before installing the Mass Air Flow Sensor/iat sensor attach its corresponding Mass Air Flow Sensor/iat sensor seal to the Mass Air Flow Sensor/iat sensor. Afterward replace the Mass Air Flow Sensor/iat sensor within the air cleaner assembly. Mount the Mass Air Flow Sensor/iat sensor screws into place before securing them to a torque of 4 nm (35 lb in). Connect the engine wiring harness electrical connector to the Mass Air Flow Sensor/iat sensor before putting back the air cleaner outlet duct.