How to replace the steering linkage inner tie rod on Chevrolet Traverse?

Before installing a new steering linkage inner Tie Rod you must take out both the power steering gear from the vehicle along with its power steering gear boot. Proceed with the replacement task without disturbance after checking the inner Tie Rod for corrosion or contamination. Position the power steering gear in a vise to avoid changing its preload adjustment. Place the steering linkage shock damper onto the power steering gear before sliding it toward the power steering gear rack. Apply a pipe wrench to the power steering gear rack while using a wrench on the flats of the steering linkage inner Tie Rod housing then turn it counterclockwise until separation occurs from the power steering gear rack. Perform the procedure again on the steering linkage inner Tie Rod housing then clean its threads before installing loctite(R) 262 or its equivalent product if needed. Use the j 34028 inner Tie Rod wrench to tighten the steering linkage inner Tie Rod onto the power steering gear rack to 100 nm (74 lb ft). Check the connection fit with 0.25 mm gage when possible before staking when needed. Conclude this process by placing the shock dampener over the steering linkage inner Tie Rod housing followed by power steering gear boot installation then putting back the power steering gear to its original position on the vehicle.

OEM Chevrolet Traverse Tie Rod

Steering Tie Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Tie Rods found

View related parts
Chevrolet Traverse Outer Tie Rod, Passenger Side
Part Number: 23214216
$41.53 MSRP: $70.68
You Save: $29.15 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly-Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Passenger Side
- Replaced by: 87853957
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chevrolet Traverse | High Country, L, LS, LT, Premier, RS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Inner Tie Rod
Part Number: 20817752
$58.60 MSRP: $142.99
You Save: $84.39 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Inner; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Inner
- Replaces: 15869898
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Outer Tie Rod
Part Number: 15869897
$72.10 MSRP: $122.75
You Save: $50.65 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Outer Tie Rod, Driver Side
Part Number: 87853956
$41.53 MSRP: $70.68
You Save: $29.15 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly-Steering Linkage Outer Tie; Rod, Steering Tie Rod Outer
- Position: Driver Side
- Replaces: 23214215
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chevrolet Traverse | High Country, L, LS, LT, Premier, RS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Inner Tie Rod
Part Number: 84878450
$28.63 MSRP: $47.18
You Save: $18.55 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Inner; Steering Tie Rod End; Tie Rod End
- Position: Inner
- Replaced by: 87853963
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chevrolet Traverse | High Country, L, LS, LT, Premier, RS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS

Chevrolet Traverse Tie Rod

Our website offers an extensive catalog of genuine Chevrolet Traverse Tie Rod at unbeatable prices. Every OEM Chevrolet Traverse Tie Rod comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Traverse Tie Rod Parts Questions & Experts Answers

Inner Tie Rod
20817752
Q: How to replace the steering linkage inner tie rod on Chevrolet Traverse?
A: Before installing a new steering linkage inner Tie Rod you must take out both the power steering gear from the vehicle along with its power steering gear boot. Proceed with the replacement task without disturbance after checking the inner Tie Rod for corrosion or contamination. Position the power steering gear in a vise to avoid changing its preload adjustment. Place the steering linkage shock damper onto the power steering gear before sliding it toward the power steering gear rack. Apply a pipe wrench to the power steering gear rack while using a wrench on the flats of the steering linkage inner Tie Rod housing then turn it counterclockwise until separation occurs from the power steering gear rack. Perform the procedure again on the steering linkage inner Tie Rod housing then clean its threads before installing loctite(R) 262 or its equivalent product if needed. Use the j 34028 inner Tie Rod wrench to tighten the steering linkage inner Tie Rod onto the power steering gear rack to 100 nm (74 lb ft). Check the connection fit with 0.25 mm gage when possible before staking when needed. Conclude this process by placing the shock dampener over the steering linkage inner Tie Rod housing followed by power steering gear boot installation then putting back the power steering gear to its original position on the vehicle.