How to replace the Power Steering Hose on Chevrolet Traverse?

The process of replacing the Power Steering Cooler pipe/hose begins by removing the right front frontwards wheelhouse liner. Place drain pans under the vehicle according to need. The mechanic should first loosen the Power Steering Cooler pipe clamp and then disconnect the Power Steering Cooler pipe from the power steering fluid cooler. The replacement process requires removal of the power steering gear outlet hose bracket bolt while also discarding the power steering gear outlet hose clamp. First separate the Power Steering Cooler pipe from the power steering gear outlet hose (4,3) while removing all plastic retaining clips from the Power Steering Cooler pipe until they can be discarded. The Power Steering Cooler pipe needs to be taken off from the car. The new Power Steering Cooler pipe must be put into position before installing its matching clamp. Connection of the Power Steering Cooler pipe requires attachment to the power steering gear outlet hose (4,3) while observing fastener safety protocols. Fasten and tighten the power steering gear outlet hose bracket bolt to 8 nm (71 lbs in). Position the Power Steering Cooler pipe and fasten it to the power steering fluid cooler while tightening the Power Steering Cooler pipe clamp. Severe the remaining fluid from the vehicle before reattaching and securing the right front frontwards wheelhouse liner. The power steering requires final filling before completing a bleeding process.

OEM Chevrolet Traverse Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Power Steering Hoses found

View related parts
Chevrolet Traverse Power Steering Return Hose
Part Number: 22915139
$61.69 MSRP: $105.05
You Save: $43.36 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Lower Return Line; Hose, Steering Gear Oil Return
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Return Hose
Part Number: 22915138
$37.82 MSRP: $64.95
You Save: $27.13 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Steering Fluid Cooler; Power Steering Hose; Lower Return Tube
- Replaces: 15869853, 25876164, 25840979
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Power Steering Pressure Hose
Part Number: 22913984
$29.14 MSRP: $48.01
You Save: $18.87 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Power Steering Fluid Reservoir Outlet; Power Steering Hose; Suction Hose; Hose, Hydraulic Steering Gear Pressure; Hose, Steering Gear Oil Pressure; Hose, Steering Gear Oil Return
- Replaces: 20928145, 22789060, 25879973
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Power Steering Return Hose
Part Number: 22847737
$17.16 MSRP: $28.27
You Save: $11.11 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Reservoir Hose; Hose, Steering Gear Oil Return
- Replaces: 22780186, 20767191, 25925955
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Pipe Kit
Part Number: 20887540
$45.21 MSRP: $77.64
You Save: $32.43 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Pipe Kit, Hydraulic Steering Gear Pressure
- Replaces: 15948976
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Power Steering Pressure Hose
Part Number: 19433875
$172.55 MSRP: $271.49
You Save: $98.94 (37%)
Product Specifications
- Other Name: Hose, Steering Gear Oil Pressure; Pressure Hose; Hose, Hydraulic Steering Gear Pressure
- Replaced by: 19540418
- Replaces: 20938551, 22912855, 25805111, 15923722, 20920116, 22802435, 20779364
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS

Chevrolet Traverse Power Steering Hose

Our website offers an extensive catalog of genuine Chevrolet Traverse Power Steering Hose at unbeatable prices. Every OEM Chevrolet Traverse Power Steering Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Traverse Power Steering Hose Parts Questions & Experts Answers

Pipe Kit
20887540
Q: How to replace the Power Steering Hose on Chevrolet Traverse?
A: The process of replacing the Power Steering Cooler pipe/hose begins by removing the right front frontwards wheelhouse liner. Place drain pans under the vehicle according to need. The mechanic should first loosen the Power Steering Cooler pipe clamp and then disconnect the Power Steering Cooler pipe from the power steering fluid cooler. The replacement process requires removal of the power steering gear outlet hose bracket bolt while also discarding the power steering gear outlet hose clamp. First separate the Power Steering Cooler pipe from the power steering gear outlet hose (4,3) while removing all plastic retaining clips from the Power Steering Cooler pipe until they can be discarded. The Power Steering Cooler pipe needs to be taken off from the car. The new Power Steering Cooler pipe must be put into position before installing its matching clamp. Connection of the Power Steering Cooler pipe requires attachment to the power steering gear outlet hose (4,3) while observing fastener safety protocols. Fasten and tighten the power steering gear outlet hose bracket bolt to 8 nm (71 lbs in). Position the Power Steering Cooler pipe and fasten it to the power steering fluid cooler while tightening the Power Steering Cooler pipe clamp. Severe the remaining fluid from the vehicle before reattaching and securing the right front frontwards wheelhouse liner. The power steering requires final filling before completing a bleeding process.