How to replace a water pump on Chevrolet Uplander?

Start replacement of the Water Pump by draining the cooling system using either static fill lz9 or vac-n-fill procedures. First loosen all bolts that hold the Water Pump Pulley then pull off the Drive Belt. Begin by loosening the pulley bolts and removing the pulley. Then unfasten the Water Pump bolts and take out the pump with its gasket. Prepare the Water Pump surfaces for installation by cleaning them before putting on the new gasket and pump. Secure the Water Pump bolts by turning them to 10 n.m (89 lb in). Secure the new Water Pump Pulley to its place and fasten the bolts after placing the Drive Belt onto the unit. Use a torque wrench to fasten the Water Pump Pulley bolts at 25 n.m (18 lb ft). Complete the cooling system by using the chosen filling procedure static fill lz9 or vac-n-fill and then check for fluid loss.

OEM Chevrolet Uplander Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Water Pumps found

View related parts
Chevrolet Uplander Water Pump
Part Number: 89017269
$129.14 MSRP: $252.84
You Save: $123.70 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Water; Water Pump Assembly; Pump Kit, Engine Coolant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS
View related parts
Chevrolet Uplander Water Pump
Part Number: 12702111
$151.00 MSRP: $281.75
You Save: $130.75 (47%)
ADD TO CART
Product Specifications
- Other Name: Pump Kit-Water; Water Pump Assembly; Pump Kit, Engine Coolant
- Replaces: 89060479, 89017757
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

Chevrolet Uplander Water Pump

Our website offers an extensive catalog of genuine Chevrolet Uplander Water Pump at unbeatable prices. Every OEM Chevrolet Uplander Water Pump comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Uplander Water Pump Parts Questions & Experts Answers

Water Pump
12702111
Q: How to replace a water pump on Chevrolet Uplander?
A: Start replacement of the Water Pump by draining the cooling system using either static fill lz9 or vac-n-fill procedures. First loosen all bolts that hold the Water Pump Pulley then pull off the Drive Belt. Begin by loosening the pulley bolts and removing the pulley. Then unfasten the Water Pump bolts and take out the pump with its gasket. Prepare the Water Pump surfaces for installation by cleaning them before putting on the new gasket and pump. Secure the Water Pump bolts by turning them to 10 n.m (89 lb in). Secure the new Water Pump Pulley to its place and fasten the bolts after placing the Drive Belt onto the unit. Use a torque wrench to fasten the Water Pump Pulley bolts at 25 n.m (18 lb ft). Complete the cooling system by using the chosen filling procedure static fill lz9 or vac-n-fill and then check for fluid loss.

Related Chevrolet Uplander Parts

Browse Chevrolet Uplander Water Pump by Years

2008 2007 2006 2005