Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 89017269
Water Pump

1997-2007 GM

Customer Questions & Expert Answers (18)
GM 89017269 Water Pump
GM 89017269 Water Pump
GM 89017269 Water Pump
GM 89017269 Water Pump
GM 89017269 Water Pump
GM 89017269 Water Pump
  • Part Description
    Pump Kit, Water
  • Manufacturer
    General Motors
Make sure this part fits
$131.73 MSRP: $257.90
You Save: $126.17 (49%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 89017269 Water Pump is Ref No. 9 in the diagram below

    2002 Buick Rendezvous Water Pump Diagram for 89017269
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 89017269

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS
    2004 Chevrolet ImpalaBase6 Cyl 3.4 L GAS
    1997-2006 Chevrolet MalibuBase, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS6 Cyl 3.1 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS
    2004 Chevrolet VentureLS, LT, Plus6 Cyl 3.4 L GAS
    1999-2004 Oldsmobile AleroGL, GLS, GX6 Cyl 3.4 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1997 Oldsmobile Cutlass SupremeBase6 Cyl 3.1 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 89017269 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89017269 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a water pump on Buick Century? Posted by Customer
    A:
    You need to empty the cooling system and take off the Drive Belt guard before starting Water Pump replacement. Untighten Water Pump Pulley bolts and remove Drive Belt. After that loosen and remove the Water Pump Pulley bolts then take off the Water Pump Pulley. Disconnect the Water Pump bolts and take out both the pump and gasket in that order. Prepare the Water Pump areas with cleaning before you put the new gasket and Water Pump in place. Affix the Water Pump bolts securely at 10 nm (89 inch lbs.) and put on the Water Pump Pulley bolts. Tighten these final bolts to 25 nm (18 ft. Lbs.). Put back the Drive Belt parts and belt guard while filling the cooling system then checking for any fluid leaks.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the water pump (LA1) on Buick Rendezvous? Posted by Customer
    A:
    You need to empty the cooling system until the Water Pump drainage line is below the pump to replace la1. First turn off the Drive Belt guard and unbolt both Water Pump Pulley bolts and Drive Belt. Start by unscrewing the Water Pump bolts then take off its components followed by removing the pump and gasket. Wipe both sides of the Water Pump assembly before adding its new gasket and replacing the pump itself. Fasten the new Water Pump bolts with 10 nm torque and put back the Water Pump Pulley with its bolts adjusted to 25 nm. Put back the Drive Belt and its cover before filling the cooling system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the water pump (RPO LX9) on Buick Rendezvous? Posted by Customer
    A:
    To change the Water Pump (RPO LX9), you should first empty the cooling system and afterward remove the Drive Belt after loosening the pulley bolts. Following that, grab the Water Pump Pulley bolts and pull out the Water Pump Pulley, and then the Water Pump bolts to get the Water Pump off. Throw away the old Water Pump Gasket and clean all the contacting surfaces. You should put a new Water Pump Gasket on the Water Pump before installing the Water Pump itself. Make sure you put in the Water Pump bolts and tighten them until they reach a torque of 10 nm (89 inch lbs.). Install the Water Pump Pulley at this point, then snug the pulley bolts before you put the Drive Belt back on. Tighten the Water Pump Pulley bolts to 25 nm (18 ft. Lbs.), and then fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the water pump on Buick Century? Posted by Customer
    A:
    You need to empty the cooling system before using a socket wrench to remove both the shield bolt and shield of the Drive Belt. Unfasten the Water Pump Pulley bolts first while the Water Pump Pulley remains at rest. Remove the Drive Belt after loosening the Water Pump Pulley bolts. Finally, take out all bolts and the pump pulley itself. You should first take off the Water Pump bolts then the Water Pump itself. Afterwards extract the Water Pump Gasket. Prepare both Water Pump attachment areas with cleaning before you set the new gasket and install the Water Pump. Place Water Pump bolts into their holes and tighten them to 10 nm force before assembling the Water Pump Pulley. Twist the pulley bolts to 25 nm force during installation. Fit the Drive Belt back on and put the Drive Belt shield followed by its bolt into place while tightening the bolt to 10 nm (89 inch lbs.). Finally, fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a water pump on Chevrolet Malibu? Posted by Customer
    A:
    Start by draining the cooling system and then loosen the pulley bolts followed by taking off the Drive Belt for the Water Pump. After that, go on to remove the pulley bolts and the pulley, then the Water Pump itself and its gasket too. Don't forget to clean the flanges before placing the Water Pump gasket and pump . You need to tighten the Water Pump bolts so the torque is 10 nm (89 inch lbs.). Tighten the Water Pump Pulley and bolt only enough to keep it in place, then put on the Drive Belt and tighten the Water Pump Pulley bolts to 25 nm (18 ft. Lbs.). You should then fill the cooling system and check for any leaks.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a water pump on Chevrolet Uplander? Posted by Customer
    A:
    To install the new Water Pump first empty the cooling system then loosen the Water Pump Pulley bolts and take off the Drive Belt. First remove both types of Water Pump Pulley bolts to loosen the attached devices. Then detach the Water Pump bolts, gasket, and element. Ensure the pump faces are clean prior to setting the Water Pump gasket and pump. Fasten the Water Pump bolts and secure them at 10 nm torque. Install the Water Pump Pulley and bolt it lightly before putting on the Drive Belt. Afterwards, bolt the Water Pump Pulley with 25 nm (18 ft. Lbs.) torque. End by filling the cooling system and checking for fluid leaks.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the water pump pulley for the 2000 Buick Century? Posted by Customer
    A:
    Take out the water pump attaching bolts and remove the water pump along with its gasket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the first step to replace the water pump for the 2001 Buick Century? Posted by Customer
    A:
    First, drain the coolant and remove the drive belt guard.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What should be done after installing the water pump pulley for the 2003 Buick Century? Posted by Customer
    A:
    Reinstall the drive belt, followed by the drive belt shield and its bolt, tightening it to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the next step after removing the drive belt for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Remove the water pump pulley bolts and the water pump pulley itself, followed by the water pump bolts to take out the water pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the next step after installing the water pump for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Reattach the water pump pulley and snug the pulley bolts before reinstalling the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the next step after repositioning the power steering pump for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Take out the water pump bolts and the water pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    How should the water pump pulley bolts be secured for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Tighten them to 25 Nm (18 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the next step after removing the drive belt for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Take out the water pump pulley bolts and pulley.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    How should the water feed pipe seals be prepared before installation for the 2006 Chevrolet Malibu? Posted by Customer
    A:
    Lightly lubricate the water feed pipe seals with silicone gel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the next step after removing the drive belt for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Take out the water pump pulley bolts and pulley.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the procedure for inserting the water feed pipe for the 2004 Chevrolet Malibu? Posted by Customer
    A:
    Insert the water feed pipe into the water pump assembly, aligning it with the thermostat housing assembly, and seat the water feed O-ring seal carefully.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Water Pump 89017269 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89017269 Water Pump is available in the market under the name GM Water Pump. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89017269 Water Pump fits certain Chevrolet Malibu, Impala, Uplander models, as well as Buick Century, Rendezvous, Terraza. Additionally, it is compatible with Pontiac G6, Grand Prix, Grand Am and Oldsmobile Cutlass, Alero, Cutlass Supreme models.
The original GM component designated by manufacturer part number 89017269 maintains top performance when functioning as the Pump Kit, Water unit. The component 89017269 is constructed from durable material and its dimensions span 6.8 x 6.4 x 5.2 inches while weighing 3.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Water Pump Assembly; Pump Kit, Engine Coolant. The part 89017269 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.