How to service the Air Bag Sensor in the Front End on Chevrolet Venture?

Disable the sir system as the first step to service the inflatable restraint front end discriminating sen. Before disconnecting the electrical connector from the front end discriminating sensor remove the connector-position assurance component from the electrical connector on that sensor. Start by removing the two integral bolts that fasten the front end discriminating sensor to the frame front cross member before pulling the sensor from the vehicle. Position the front end discriminating sensor in place by installing its two integral bolts onto the frame front cross member until they reach 8 n.m (71 lb in) torque. You must install the sensor electrical connector on the front end discriminating sensor. Also remake the connection between the sensor electrical connector and the front end discriminating sensor. Then reinstall the cpa onto the sensor electrical connector. Finally, enable the sir system.

OEM Chevrolet Venture Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Bag Sensors found

View related parts
Chevrolet Venture Front Sensor, Passenger Side
Part Number: 10354930
$79.50 MSRP: $187.54
You Save: $108.04 (58%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Side Impact Sensor; Side Sensor
- Position: Passenger Side
- Replaces: 09353971, 10326149, 10448145, 9353971
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Front Sensor, Driver Side
Part Number: 10354929
$66.78 MSRP: $262.55
You Save: $195.77 (75%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Side Impact Sensor; Side Sensor
- Position: Driver Side
- Replaces: 09353981, 10448146, 10326150, 9353981
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Front Sensor
Part Number: 10354928
Product Specifications
- Other Name: Sensor Assembly-Inflatable Restraint Front End Discriminating; Air Bag Sensor; Sensor, Inflatable Restraint System
- Position: Front
- Replaces: 09364550, 9364550
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

Chevrolet Venture Air Bag Sensor

Our website offers an extensive catalog of genuine Chevrolet Venture Air Bag Sensor at unbeatable prices. Every OEM Chevrolet Venture Air Bag Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Venture Air Bag Sensor Parts Questions & Experts Answers

Front Sensor, Passenger Side
10354930
Q: How to service the Air Bag Sensor in the Front End on Chevrolet Venture?
A: Disable the sir system as the first step to service the inflatable restraint front end discriminating sen. Before disconnecting the electrical connector from the front end discriminating sensor remove the connector-position assurance component from the electrical connector on that sensor. Start by removing the two integral bolts that fasten the front end discriminating sensor to the frame front cross member before pulling the sensor from the vehicle. Position the front end discriminating sensor in place by installing its two integral bolts onto the frame front cross member until they reach 8 n.m (71 lb in) torque. You must install the sensor electrical connector on the front end discriminating sensor. Also remake the connection between the sensor electrical connector and the front end discriminating sensor. Then reinstall the cpa onto the sensor electrical connector. Finally, enable the sir system.