How to replace the Air Bag Sensor for the side impact on 2004 Chevrolet Venture?

To replace the inflatable restraint side impact sensor, one has to first immobilize the SIR system. After removing the seat belt retractor trim cover, loosen the fasteners that hold the sensor in place. Pull off the sensor from the center pillar and disconnect the wire connector assurance (CPA) from the yellow 2 way wiring connector, and finally, disconnect the wiring harness connector. For the installation, connect the yellow 2-way connector to the new sensor and install the CPA onto the wiring harness connector . Secure the sensor back to the center pillar and make sure that you install the fasteners and tighten then with load of 10 N.m (89 lb in). Lastly, reinstall the seat belt retractor trim cover and turn on the SIR system.

OEM 2004 Chevrolet Venture Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Bag Sensors found

View related parts
2004 Chevrolet Venture Front Sensor, Driver Side
Part Number: 10354929
$66.78 MSRP: $262.55
You Save: $195.77 (75%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Side Impact Sensor; Side Sensor
- Position: Driver Side
- Replaces: 09353981, 10448146, 10326150, 9353981
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10354929
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2004 Chevrolet Venture Front Sensor, Passenger Side
Part Number: 10354930
$79.50 MSRP: $187.54
You Save: $108.04 (58%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Side Impact Sensor; Side Sensor
- Position: Passenger Side
- Replaces: 09353971, 10326149, 10448145, 9353971
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.3 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10354930
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2004 Chevrolet Venture Front Sensor
Part Number: 10354928
Product Specifications
- Other Name: Sensor Assembly-Inflatable Restraint Front End Discriminating; Air Bag Sensor; Sensor, Inflatable Restraint System
- Position: Front
- Replaces: 09364550, 9364550
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10354928
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2004 Chevrolet Venture Air Bag Sensor

With a comprehensive array of OEM 2004 Chevrolet Venture Air Bag Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Venture Air Bag Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Venture Parts Questions & Experts Answers

Q: How to replace the Air Bag Sensor for the side impact on 2004 Chevrolet Venture?
A: To replace the inflatable restraint side impact sensor, one has to first immobilize the SIR system. After removing the seat belt retractor trim cover, loosen the fasteners that hold the sensor in place. Pull off the sensor from the center pillar and disconnect the wire connector assurance (CPA) from the yellow 2 way wiring connector, and finally, disconnect the wiring harness connector. For the installation, connect the yellow 2-way connector to the new sensor and install the CPA onto the wiring harness connector . Secure the sensor back to the center pillar and make sure that you install the fasteners and tighten then with load of 10 N.m (89 lb in). Lastly, reinstall the seat belt retractor trim cover and turn on the SIR system.