OEM 2004 Chevrolet Venture Neutral Safety Switch

2004 Chevrolet Venture Parts Questions & Experts Answers

• Q: How to replace the Neutral Safety Switch on 2004 Chevrolet Venture?

  A: Before installation start by activating the parking brake and wheel blocking then move the transmission into neutral. Use a flat-bladed tool to detach the automatic transaxle range selector cable from the cable lever while the throttle body air inlet duct is disconnected. Begin by disconnecting electrical connectors and then removing automatic transaxle range selector lever before extracting pnp switch bolts and pnp switch from its location. The pnp switch requires a new manufacturing position of neutral because it cannot rotate. Secure the pnp switch to the transaxle by aligning its flats with the shift shaft then tighten the bolts to 25 nm (18 ft. Lbs.). Shut down the engine for reinstallation of the automatic transaxle range selector lever. Then connect the electrical connectors and hook up the automatic transaxle range selector cable. Test the engine startup while the transmission stays in park or neutral position then make required modifications. Reinstall the throttle body air inlet duct after removing the blocks from the wheels and releasing the parking brake. The j 41545 park/neutral switch aligner serves as the main tool for performing this procedure.