OEM Chevrolet Venture Antenna Cable

Chevrolet Venture Antenna Cable Parts and Q&A

• Antenna Cable
  10299633
  Q: How to service and repair the antenna cables on Chevrolet Venture?

  A:

  Begin antenna cable service and repair by eliminating the radio then removing the right instrument panel insulator followed by the right cowl side trim panel and headliner front. Reserve this procedure for servicing antenna cables which require extension cable removal from roof bolt then separation of cable from instrument panel carrier before extracting antenna cables and extension from the vehicle chassis. Install by feeding the antenna cable extension together with the antenna cable into the vehicle while fastening the antenna cable to the instrument panel carrier. Refer to the Fastener Notice in Service Precautions before installing the antenna cable extension to the roof bolt while tightening the bolt to 3.2 N.m (28 lb in). To complete the installation you must place the headliner front and both the right cowl side trim panel and right instrument panel insulator before fitting the radio in place.
• Antenna Cable
  10308055
  Q: How to replace the Antenna Cable for the cellular telephone on Chevrolet Venture?

  A:

  The cellular telephone coaxial cable replacement process begins with removing the instrument panel (IP) trim pad together with the right side windshield pillar garnish molding. Detach the coaxial cable from the cellular Antenna mounted on the windshield and also from the viu/vcu module. Start by removing the bolt which attaches the ground tab on the right side of the ip followed by unfastening cable clips from the ip to remove the coaxial cable. Install the new coaxial cable by securing it to the ip frame using the cable clips as the first step of installation. You should place the bolt on the ground tab positioned at the right-side corner of the IP before linking and tightening the coaxial cable to the viu/vcu module. Secure the cable to the a-pillar and connect and tighten the coaxial cable from the cellular Antenna on the windshield. The last step includes return of the garnish molding back to the right side windshield pillar and the ip trim pad.