How to replace the air filter element on GMC Acadia?

Question

Accepted Answer

Before starting the Air Filter replacement process you need to remove the fuel injector sight shield followed by disconnecting the positive crankcase ventilation (PCV) fresh air tube from the camshaft cover fitting. First disconnect the engine wiring harness electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor and then loosen the Air Filter outlet duct clamp at the Throttle Body. Agents working on the Air Filter outlet duct must first loosen 6 Air Filter housing cover screws before separating the Air Filter outlet duct from the Throttle Body. Before disposal take off the Air Filter housing cover together with its attached outlet duct. Install a new Air Filter before setting the Air Filter housing cover (along with outlet duct) onto the Air Filter lower housing. At the Throttle Body attach the Air Filter outlet duct then tighten the six Air Filter housing cover screws until they are securely fastened. Tighten the Air Filter outlet duct clamp at the Throttle Body to 4 n.m (35 lb in). Finish the maf/iat sensor electrical hook up in the engine wiring harness before reattaching the pcv fresh air tube to the camshaft cover fitting while putting back the fuel injector sight shield.

OEM GMC Acadia Air Filter

4 Air Filters found

GMC Acadia Air Filter

GMC Acadia Air Filter

GMC Acadia Air Cleaner Assembly

GMC Acadia Air Cleaner Assembly

GMC Acadia Air Filter

GMC Acadia Air Filter Parts Questions & Experts Answers

Related GMC Acadia Parts

Browse GMC Acadia Air Filter by Years