How to service the Mass Air Flow Sensor on GMC C2500?

To service mass air flow (MAF) sensor tackle that maf-iat sensor with care to prevent the destruction of honeywell on the air inlet end; do not put fingers on the sensing elements and do not bring cleaning solvents of lubricating oil to be in touch with them. Apply a small quantity of a non-silicone based lubricant on the air duct to help with installation. Start with loosening the clamps (1,3) at the maf-iat sensor and at the Throttle Body & then remove the air intake duct from both the maf-iat sensor & the Throttle Body. Untighten the clamp holding the maf-iat sensor to the air cleaner housing and disconnect the maf/iat sensor electrical connector before removing the sensor out of the air cleaner assembly. For installation, turn the embossed arrow pointing towards the engine softward on the maf-iat sensor then install it to the air cleaner housing to and secure to it using the securing clamp. Reconnect the maf-iat electrical connector,reinstall the air intake duct to the maf-iat sensor and close the Throttle Body, and lastly tighten clamps (1,3) at the maf-iat sensor), and the Throttle Body.

OEM GMC C2500 Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Mass Air Flow Sensors found

View related parts
GMC C2500 Mass Air Flow Sensor Part Number: 19332972
$194.28 MSRP: $348.48
You Save: $154.20 (45%)
Product Specifications
- Other Name: Sensor Kit, Mass Airflow; Air Mass Sensor; Sensor Kit, Computer Control Sensors; Sensor, Computer Control Sensors
- Replaces: 19207203, 25008308, 25008307, 25179711
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Temperature Sensor Part Number: 8997787
Product Specifications
- Other Name: Sensor, Air Cleaner; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Temperature Sensor; Air Intake Temperature Sensor; Vacuum Valve; Air Cleaner Controls; Intake Sensor; Intake Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1986 GMC C2500 | Base, High Sierra, Sierra Classic | 6 Cyl 4.8 L GAS
View related parts
GMC C2500 Temperature Sensor Part Number: 8997493
Product Specifications
- Other Name: Sensor Package; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Air Cleaner Controls; Air Cleaner Intake; Sensor.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1986 GMC C2500 | Base, High Sierra, Sierra Classic | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

GMC C2500 Mass Air Flow Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Mass Air Flow Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC C2500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC C2500 Mass Air Flow Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Mass Air Flow Sensor specially used for GMC C2500 is an important component that contributes to the improvement of the performance of GMC C2500 vehicles. This sensor determines the quantity of air that gets into the engine to that ideal mixture of air and fuel that should burn. Through signaling the Powertrain Control Module, this GMC C2500 Mass Air Flow Sensor helps to fine tune the amount of fuel injector timing, which is very important in enhancing the fuel economy, as well as the engine authority of the vehicle. Intended for compatible with a range of GMC C2500 models manufactured from 1960 to 1998, this sensor is created to fulfill the requirements of vigorous work without compromising longevity and protection. The available types of GMC C2500 Mass Air Flow Sensor include; Vane Meter and Hot Wire sensors for the different performances of an automobile. Much attention should be paid to the maintenance of the GMC C2500 Mass Air Flow Sensor as it determines efficiency and the vehicle's service life. The part is reputable and People who own GMC C2500 will recommend it due to the reliability it has been known to portray. Moreover, the saving on fuel as a result of the efficiency of the sensor besides improving the financial aspect, it also fosters the protection of the environment through less emission of greenhouse gases. You can easily shop for the GMC C2500 Mass Air Flow Sensor as this part has high impact in the management of GMC C2500 vehicle engine hence creating higher standard and reliability in the market.

GMC C2500 Mass Air Flow Sensor Parts Questions & Experts Answers

Mass Air Flow Sensor
19332972
Q: How to service the Mass Air Flow Sensor on GMC C2500?
A:
To service mass air flow (MAF) sensor tackle that maf-iat sensor with care to prevent the destruction of honeywell on the air inlet end; do not put fingers on the sensing elements and do not bring cleaning solvents of lubricating oil to be in touch with them. Apply a small quantity of a non-silicone based lubricant on the air duct to help with installation. Start with loosening the clamps (1,3) at the maf-iat sensor and at the Throttle Body & then remove the air intake duct from both the maf-iat sensor & the Throttle Body. Untighten the clamp holding the maf-iat sensor to the air cleaner housing and disconnect the maf/iat sensor electrical connector before removing the sensor out of the air cleaner assembly. For installation, turn the embossed arrow pointing towards the engine softward on the maf-iat sensor then install it to the air cleaner housing to and secure to it using the securing clamp. Reconnect the maf-iat electrical connector,reinstall the air intake duct to the maf-iat sensor and close the Throttle Body, and lastly tighten clamps (1,3) at the maf-iat sensor), and the Throttle Body.