For servicing and repairing the Steering Wheel, start by disconnecting the negative
Battery Cable and also disabling the supplemental inflatable restraint (SIR) system. Now, take out the inflator module and horn switch. Use an alignment mark to record the position of the Steering Wheel relative to Steering Shaft, and after that exclude the Steering Wheel nut. Start by using the j 1859-a Steering Wheel puller (J 1859-A) part to remove the Steering Wheel. For installation, align marks made in removal on Steering Shaft and Steering Wheel and install the Steering Wheel onto the Steering Shaft. Mount the Steering Wheel nut and tighten it to 40 nm (29 ft. Lbs). Install the horn switch and the inflator module, and re-enable the sir system, and reconnect the negative Battery Cable. Lastly, determine the idle learn procedure for 4.8l, 5.3l, and 6.0l engines only.