How to service and repair the Brake Pedal Assembly on GMC C3500?

The service process begins with disconnecting the battery negative cable and disabling the sir system. Remove the electrical connector from the stoplamp switch and separate the Pushrod retainer, stoplamp switch, pushrod, nut, Brake Pedal bolt, bushings and spacer. Place the Brake Pedal into position first and then put on the spacer then bushings. Secure and tighten the bolt to 47 nm by turning the nut 35 times. Insert the Pushrod and connect the electrical connector to the stoplamp switch before placing on the Pushrod retainer. At the end put sir in use and join the battery power wire.

OEM GMC C3500 Brake Pedal

Brake Pedal Pad

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Pedal found

View related parts
GMC C3500 Parking Brake Control
Part Number: 15155147
Product Specifications
- Other Name: Lever, Parking Brake Apply; Pedal, Brake
- Replaces: 15986103
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

GMC C3500 Brake Pedal

Our website offers an extensive catalog of genuine GMC C3500 Brake Pedal at unbeatable prices. Every OEM GMC C3500 Brake Pedal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC C3500 Brake Pedal Parts Questions & Experts Answers

Parking Brake Control
15155147
Q: How to service and repair the Brake Pedal Assembly on GMC C3500?
A: The service process begins with disconnecting the battery negative cable and disabling the sir system. Remove the electrical connector from the stoplamp switch and separate the Pushrod retainer, stoplamp switch, pushrod, nut, Brake Pedal bolt, bushings and spacer. Place the Brake Pedal into position first and then put on the spacer then bushings. Secure and tighten the bolt to 47 nm by turning the nut 35 times. Insert the Pushrod and connect the electrical connector to the stoplamp switch before placing on the Pushrod retainer. At the end put sir in use and join the battery power wire.