How to replace the front seat cushion pad and cover on GMC Canyon?

The replacement process for front seat cushion cover and pad requires the vehicle seat removal followed by cup holder bracket detachment through straight pulling. You need to remove first the trim panel from the front seat cushion exterior before detaching the 3 bolts securing the cup holder bracket from the seat frame except in cases with no cup holder. Unclip the front, rear and side j-strips (1, 2) which are located under the seat before pulling the lumbar knob directly off while accounting for an equipped seat. First remove both the seat switch bezel (if present) while simultaneously taking off the recliner handle. Unlock the seat recliner from its seat adjuster mounting with two bolts and then separate the seat back unit from the seat cushion unit. After disconnecting the seat belt buckle electrical connector the technician should detach any clips or straps that hold the electrical harness to the seat cushion frame base. Disassemble the seat by removing the bolt that fastens the seat belt buckle assembly to the seat adjuster then unfasten the seat cushion cover and cushion foam. Before pad replacement you need to peel off the heating element from the pad when the pad contains this component. Installation requires an adhesive-backed heating element which should be applied onto the pad when replacing (if equipped) after which the cover needs to be installed onto the pad through hog ring attachment. Install the seat belt buckle assembly through the Seat Cushion Pad while attaching the frame to the seat cushion foam pad along with its cover. Attaching the seat belt buckle assembly to the seat adjuster requires fastening it with the bolt until it reaches 55 n.m (41 lb ft) torque. The seat belt buckle electrical connector should be connected and all electrical harness clips or straps need to be restated. Fasten the seat back assembly to the seat cushion assembly using the 2 seat recliner bolts while torquing them to 24 n.m (18 lb ft). If the seat has a switch bezel you should reinstall it before pushing a lumbar knob directly onto the shaft when present. After installing the recliner handle you must attach the front and rear and side j-strips (1, 2) under the seat platform. Use three bolts to fasten the cup holder bracket onto the seat frame while tightening them at 9.1 n.m (80 lb in). Then install the front seat cushion outer trim panel. The seat installation procedure finishes with the cup holder direct installation on its bracket along with the seat reinstallation into the vehicle.

How to replace the rear Seat Cushion Pad in a Crew Cab on GMC Canyon?

The process to replace Crew Cab rear seat cushion cover and pad starts by taking out the rear bench seat from your vehicle. Detach the seat belt buckles from seat cover loops before releasing the J-strips on the cover. Take off both the seat cover and pad from the seat frame after detachment. Install new seat cushion cover and pad on the seat frame by threading the J-strips through their proper placement. Replace the seat belt buckles through the seat cover loops followed by reinstalling the rear bench seat inside the vehicle.

OEM GMC Canyon Seat Cushion Pad

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

48 Seat Cushion Pads found

View related parts
GMC Canyon Seat Back Pad Part Number: 89041330
$89.53 MSRP: $133.23
You Save: $43.70 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Rear Seat Back Cushion; Pad, Seat Back Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2011 GMC Canyon | SL, SLE, SLT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Seat Back Pad, Rear Driver Side Part Number: 19258530
$190.52 MSRP: $284.79
You Save: $94.27 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Rear Seat Back Cushion; Pad, Seat Back Cushion
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012 GMC Canyon | SLE, SLT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Seat Cushion Pad, Rear Passenger Side Part Number: 84972692
$189.17 MSRP: $282.77
You Save: $93.60 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad-Rear Seat Cushion; Front Seat Air Bag; Pad, Rear Seat Cushion; Seat Cushion
- Position: Rear Passenger Side
- Replaced by: 85636442
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Seat Cushion Pad Part Number: 89041586
$81.94 MSRP: $121.93
You Save: $39.99 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Front Seat Cushion; Pad, Seat Cushion; Seat Cushion
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
View related parts
GMC Canyon Seat Cushion Pad, Rear Driver Side Part Number: 87836306
$85.97 MSRP: $127.94
You Save: $41.97 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Rear Seat Cushion
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Seat Cushion Pad, Driver Side Part Number: 87816571
$79.17 MSRP: $117.82
You Save: $38.65 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Seat Cushion; Pad, Front Seat Cushion
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4 | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Seat Back Pad, Front Part Number: 84215696
$88.22 MSRP: $131.28
You Save: $43.06 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Front Seat Back
- Position: Front
- Replaces: 84029148
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 GMC Canyon | Denali | 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Seat Cushion Pad, Driver Side Part Number: 87816572
$86.30 MSRP: $128.42
You Save: $42.12 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Seat Cushion; Pad, Front Seat Cushion
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4X, Denali | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Seat Back Pad, Rear Part Number: 87836304
$98.52 MSRP: $146.61
You Save: $48.09 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Rear Seat Back
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Seat Back Pad, Front Part Number: 23360167
$91.53 MSRP: $136.20
You Save: $44.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Front Seat Back
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 GMC Canyon | All Terrain, Base, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Seat Back Pad, Rear Part Number: 84664218
$89.11 MSRP: $132.61
You Save: $43.50 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Rear Seat Back
- Position: Rear
- Replaces: 23380671
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Seat Back Pad, Rear Part Number: 87836305
$96.38 MSRP: $143.42
You Save: $47.04 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Rear Seat Back
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Seat Cushion Pad, Rear Driver Side Part Number: 23314578
$32.70 MSRP: $48.68
You Save: $15.98 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Rear Seat Cushion; Seat Cushion
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | All Terrain, Base, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Seat Cushion Pad, Rear Passenger Side Part Number: 87836307
$95.21 MSRP: $141.68
You Save: $46.47 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Rear Seat Cushion
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Seat Back Pad, Rear Part Number: 23120423
$60.94 MSRP: $90.68
You Save: $29.74 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Rear Seat Back
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 GMC Canyon | Base, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Seat Back Pad, Rear Part Number: 23120422
$69.43 MSRP: $103.32
You Save: $33.89 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad, Rear Seat Back
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 GMC Canyon | Base, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Seat Back Pad, Front Part Number: 84029148
$88.22 MSRP: $131.28
You Save: $43.06 (33%)
ADD TO CART
Product Specifications
- Other Name: Pad Assembly-Front Seat Back
- Position: Front
- Replaced by: 84215696
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017 GMC Canyon | Denali | 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Seat Cushion Pad Part Number: 89041470
$150.80 MSRP: $225.42
You Save: $74.62 (34%)
Product Specifications
- Other Name: Pad, Driver Seat Cushion; Pad, Seat Cushion; Seat Cushion
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Seat Cushion Pad Part Number: 89041468
$250.46 MSRP: $374.39
You Save: $123.93 (34%)
Product Specifications
- Other Name: Pad, Driver Seat Cushion; Pad, Seat Cushion; Seat Cushion
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Seat Cushion Pad Part Number: 89041384
Product Specifications
- Other Name: Pad Assembly, Rear Seat Cushion (W/ Frame) Left-Hand; Pad, Seat Cushion; Seat Cushion
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004 GMC Canyon | SL, SLE, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS

| Page 1 of 3 |Next >

1-20 of 48 Results

GMC Canyon Seat Cushion Pad

Want to cut long-term maintenance and repair costs? Choose OEM Seat Cushion Pad. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Canyon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Canyon Seat Cushion Pad includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The GMC Canyon Seat Cushion Pad is one of the unique parts to support the driving comfort for different series of GMC Canyon which is famous for its durability and power features. Long drive does not cause any discomfort while using this Seat Cushion Pad which makes it very suitable to be used while driving. Other than the beaded design making the back into shapes that give a back massage, it also enhances the blood circulation and at the same time lets fresh air in to keep the driver awake and focused on the road. This is courtesy of the sheepskin which is used in the GMC Canyon Seat Cushion Pad to enhance the features of the GMC Canyon Seat Cushion Pad in terms of insulation, breathability and absorbency all of which helps to enhance the comfort of any traveler. This Seat Cushion Pad is available in different models suitable with GMC Canyon and it is very vital assisting in efficiency and safety to the drivers by making them more comfortable and less fatigued especially on long journeys. One cannot fail to mention the flexibility of the GMC Canyon model that is available in the regular, extended, and crew cab versions, while the Seat Cushion Pad easily conforms to the vehicle's interior space. Mentioning the features like electronic stability control, the GMC Canyon Seat Cushion Pad offers standard across all models to ensure the driver and passengers' safety among other qualities it embraces in the automotive market. All things considered, the GMC Canyon Seat Cushion Pad offers an excellent amount of comfort, support, and style to any GMC Canyon, making it a must-have part for any driver.

GMC Canyon Seat Cushion Pad Parts and Q&A

Seat Cushion Pad
89041468
Q: How to replace the front seat cushion pad and cover on GMC Canyon?
A:
The replacement process for front seat cushion cover and pad requires the vehicle seat removal followed by cup holder bracket detachment through straight pulling. You need to remove first the trim panel from the front seat cushion exterior before detaching the 3 bolts securing the cup holder bracket from the seat frame except in cases with no cup holder. Unclip the front, rear and side j-strips (1, 2) which are located under the seat before pulling the lumbar knob directly off while accounting for an equipped seat. First remove both the seat switch bezel (if present) while simultaneously taking off the recliner handle. Unlock the seat recliner from its seat adjuster mounting with two bolts and then separate the seat back unit from the seat cushion unit. After disconnecting the seat belt buckle electrical connector the technician should detach any clips or straps that hold the electrical harness to the seat cushion frame base. Disassemble the seat by removing the bolt that fastens the seat belt buckle assembly to the seat adjuster then unfasten the seat cushion cover and cushion foam. Before pad replacement you need to peel off the heating element from the pad when the pad contains this component. Installation requires an adhesive-backed heating element which should be applied onto the pad when replacing (if equipped) after which the cover needs to be installed onto the pad through hog ring attachment. Install the seat belt buckle assembly through the Seat Cushion Pad while attaching the frame to the seat cushion foam pad along with its cover. Attaching the seat belt buckle assembly to the seat adjuster requires fastening it with the bolt until it reaches 55 n.m (41 lb ft) torque. The seat belt buckle electrical connector should be connected and all electrical harness clips or straps need to be restated. Fasten the seat back assembly to the seat cushion assembly using the 2 seat recliner bolts while torquing them to 24 n.m (18 lb ft). If the seat has a switch bezel you should reinstall it before pushing a lumbar knob directly onto the shaft when present. After installing the recliner handle you must attach the front and rear and side j-strips (1, 2) under the seat platform. Use three bolts to fasten the cup holder bracket onto the seat frame while tightening them at 9.1 n.m (80 lb in). Then install the front seat cushion outer trim panel. The seat installation procedure finishes with the cup holder direct installation on its bracket along with the seat reinstallation into the vehicle.
Seat Cushion Pad
89041470
Q: How to replace the rear Seat Cushion Pad in a Crew Cab on GMC Canyon?
A:
The process to replace Crew Cab rear seat cushion cover and pad starts by taking out the rear bench seat from your vehicle. Detach the seat belt buckles from seat cover loops before releasing the J-strips on the cover. Take off both the seat cover and pad from the seat frame after detachment. Install new seat cushion cover and pad on the seat frame by threading the J-strips through their proper placement. Replace the seat belt buckles through the seat cover loops followed by reinstalling the rear bench seat inside the vehicle.