How to replace the rear door moldings on GMC Envoy?

First, you should use a Heat Gun (J 25070) for heating of the door side molding holding the Heat Gun 152 mm (6 in) away from the surface and progressively heat the field around the door side molding, in a circular motion and for about 30 seconds, being careful not to scratch or chip the paint. Next, peel the door side molding from the panel surface using a flat bladed tool. You may de-glue all adhesive from the body panel and the back of the door side molding by employing a 3M(TM) scotch brite molding adhesive remover disk (3M(TM) PN 07501), or another one, and also clean the body panel with Varnish Makers and Painters (VMP) naphtha. For installation, clean the painted body surface in the tape contact area and make it dry, and heat the body panel with a heat lamp or heat gun if necessary, at the range of 66-100°F (18.8-41.1°C). Prepare the adhesive tape by parting the sides to reveal the sticky ta-pe lining free from sticky adhe-sive. After that, position the molding on the body panel and apply it by pressing it into ta-pes. Finally, handroll door side molding to the body for proper adhesion.

OEM GMC Envoy Door Moldings

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Door Moldings found

View related parts
GMC Envoy Side Molding, Black Part Number: 88944349
$142.73 MSRP: $213.39
You Save: $70.66 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Rear Upper
- Replaces: 15038524, 15038523
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Envoy Side Molding, Outer Passenger Side Part Number: 15001179
$95.72 MSRP: $142.46
You Save: $46.74 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Outer Passenger Side
- Replaces: 15001180
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Envoy Side Molding Part Number: 89046022
$89.11 MSRP: $132.63
You Save: $43.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 GMC Envoy | Denali | 8 Cyl 5.3 L GAS
View related parts
GMC Envoy Side Molding Part Number: 89045573
$77.08 MSRP: $114.72
You Save: $37.64 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Front Upper Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 GMC Envoy | Denali | 8 Cyl 5.3 L GAS
View related parts
GMC Envoy Side Molding Part Number: 89045572
$70.91 MSRP: $101.47
You Save: $30.56 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Front Upper Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 GMC Envoy | Denali | 8 Cyl 5.3 L GAS
View related parts
GMC Envoy Side Molding, Outer Driver Side Part Number: 88935322
$22.64 MSRP: $33.69
You Save: $11.05 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Envoy Side Molding, Outer Driver Side Part Number: 15001169
$11.21 MSRP: $16.69
You Save: $5.48 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Outer Driver Side
- Replaces: 15001170
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Envoy Side Molding Part Number: 88944348
$306.47 MSRP: $458.19
You Save: $151.72 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Front Upper Passenger Side
- Replaces: 15038544, 88980888
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Envoy Side Molding Part Number: 88944347
$306.47 MSRP: $458.19
You Save: $151.72 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Front Upper Driver Side
- Replaces: 15038537, 88980887
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Envoy Side Molding, Outer Passenger Side Part Number: 15207813
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Envoy Side Molding, Black Part Number: 88944350
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Rear Upper
- Replaces: 15038531, 15038530
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Envoy Side Molding, Outer Passenger Side Part Number: 88935323
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Envoy Side Molding, Outer Passenger Side Part Number: 10362708
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Envoy Side Molding, Outer Driver Side Part Number: 10362707
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Envoy Side Molding Part Number: 89046021
Product Specifications
- Other Name: Molding, Rear Side Door Upper; Door Moldings; Molding, Cab And Load Carrier Outer Side Decoration
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 GMC Envoy | Denali | 8 Cyl 5.3 L GAS
View related parts
GMC Envoy Side Molding, Outer Driver Side Part Number: 15207812
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 GMC Envoy | SLE, SLT | 6 Cyl 4.2 L GAS

GMC Envoy Door Moldings

Want to cut long-term maintenance and repair costs? Choose OEM Door Moldings. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Envoy parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Envoy Door Moldings includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

These Magna Chrome Door Moldings are some exterior parts that help not only in beautifying the GMC Envoy but also in improving its features as a mid-size SUV which is famous for its dependability and power. These are the Door Moldings comprising the Side Moldings, Door Edge Guards, Belt Mouldings as well as the Rocker Panel Mouldings to shield the side doors of the car from damages, reflected as dings, dents and perhaps deteriorations by the regard of the weather; hence keeping the GMC Envoy stylish and intact. Available in heavy-duty plastic or stainless steel and chrome plated finishes the Door Moldings not only protect the car but also enhance the automobiles' efficiency and safety aspects. Its installation is very simple and straightforward because of the pre-applied 3M acrylic foam tape that ensures it fits very well; any GMC Envoy owner/trucker can easily install it. These Door Moldings are suitable for use with almost any age of Envoy; the first-generation (1998-2000) as well as the second-generation (2002-2009) Envoy models can be readily fitted with these Door Moldings. The GMC Envoy has an associative background, it was showcased as the Sport/Utility of the Year by Motor Trend Magazine in 2002 and claimed the company's engine as one of ten optimal engines in the year 2002-2005. When the consumer purchases Door Moldings, the environmental surroundings improves due to better performance and the durability of the automobile as well as getting the outlook of the GMC Envoy in the market.

GMC Envoy Door Moldings Parts Questions & Experts Answers

Side Molding
88944348
Q: How to replace the rear door moldings on GMC Envoy?
A:
First, you should use a Heat Gun (J 25070) for heating of the door side molding holding the Heat Gun 152 mm (6 in) away from the surface and progressively heat the field around the door side molding, in a circular motion and for about 30 seconds, being careful not to scratch or chip the paint. Next, peel the door side molding from the panel surface using a flat bladed tool. You may de-glue all adhesive from the body panel and the back of the door side molding by employing a 3M(TM) scotch brite molding adhesive remover disk (3M(TM) PN 07501), or another one, and also clean the body panel with Varnish Makers and Painters (VMP) naphtha. For installation, clean the painted body surface in the tape contact area and make it dry, and heat the body panel with a heat lamp or heat gun if necessary, at the range of 66-100°F (18.8-41.1°C). Prepare the adhesive tape by parting the sides to reveal the sticky ta-pe lining free from sticky adhe-sive. After that, position the molding on the body panel and apply it by pressing it into ta-pes. Finally, handroll door side molding to the body for proper adhesion.