How to replace the Auxiliary Engine Oil Cooler on GMC Savana 2500?

First, lift the hood to access the lines connected to the auxiliary Engine Oil Cooler and disconnect them. After that, take out the auxiliary Oil Cooler from the vehicle. While installing, install the auxiliary Oil Cooler first and then attach the Oil Cooler lines to the car before dropping your vehicle.

How to properly install and service the oil cooler and its components for 6.0L and 8.1L engines on GMC Yukon?

The Oil Cooler, which can be built into the Radiator or placed separately before it, has serviceable lines and hoses for the cooler. Start with the removal of the plastic caps from the quick connect fittings, pull back along the pipe. Clasp one end of the retaining clip with your hands and use a small pick-like tool or bent screwdriver to carefully pry off the opposite end from the quick connect fitting, rotate it and unfasten the entire clip and throw it away. For vehicles having a 6.0l engine, open the Oil Cooler hose clip in the fan shroud. Remove the hoses out of the clip and remove the hoses out of the quick connect of Radiator fittings. Lift the car and then undo the exhaust manifold pipe nuts and relocate the pipe. For 8.1l engine cars, disconnect the Oil Cooler hoses from the clip, pull the pipe fittings straight out, and take the vehicle off and support it. Take out the engine shield bolts and the shield itself if present. For the 6.0l engine, remove hose assembly bracket bolt and bracket bolts for Oil Cooler , this then takes out hose assembly and gasket discarding it but paying attention to the fittings and hoses for abuse. For the 8.1l engine, there is a hose bracket bolt that must be removed, quick connect fittings at the engine that are also removed along with the hose assembly and rocated along with the gasket is discarded and checked for damage. But you are to get a distinct snap during the installation while you are putting together the ends of the tube of the hose assembly with the quick connectors, test by pulling strongly in hardest to verify that the hose assembly is fully inserted. For the 8 1l engine, process the quick connect fittings at the engine, fasten the hose bracket bolt, and tighten it to 50 nm (37 ft. Lbs.). For 6.0l engine, fit in the hose assembly in addition to a new gasket; tighten the adapter bolts to (12 Nm (106 inch lbs.)) & hose bracket bolt to (25 Nm (18 ft. Lbs.)) mounting the engine shield and bolts if fitted with bolt to 20-nm (15 ft. Lbs.). Install the new retaining clip on the quick connect fitting properly using your thumb and forefinger pressing it engaged in all three slots and turning it in. Mount a new retaining clip to the remaining fitting, insert the pipe to the exhaust manifold, and tighten the nuts to 50 nm (37 ft. Lbs.). Lower the vehicle, then attach the hoses to the clip on the fan shroud and snap it shut, making sure there is a plastic end on the cooler line that goes into the fitting. For the 8.1l engine, install the hoses to the clip, connect the lines to the Radiator, and be sure the line is fully inserted into the quick connect fitting while there is a click that is heard or felt, followed by a sharp pull back to ensure that it is installed. Finally, place on the snap plastic cap to the fitting ensuring it's seated in place with even the smallest gap between the cap and the fitting.

OEM GMC Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

50 Oil Coolers found

View related parts
GMC Oil Cooler Part Number: 19210615
$596.09 MSRP: $895.04
You Save: $298.95 (34%)
ADD TO CART
Product Specifications
- Other Name: Cooler, Engine Oil Cooler
- Replaced by: 19434103
- Replaces: 97351829, 97329038, 97262115
Fits the following GMC Models:
- Savana 2500 | 2006-2009 | Base | 8 Cyl 6.6 L DIESEL
- Savana 3500 | 2006-2009 | Base | 8 Cyl 6.6 L DIESEL
- Sierra 2500 HD | 2001-2010 | Base, SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View More
View related parts
GMC Oil Cooler Part Number: 52484139
$183.45 MSRP: $274.21
You Save: $90.76 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Engine Oil Cooler
Fits the following GMC Models:
- Sierra 1500 | 1999-2005 | Base, C3, Denali, HT, SL, SLE, SLT, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 1999-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2001-2005 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 3500 | 2001-2005 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Yukon | 2001-2005 | Denali | 8 Cyl 6.0 L GAS
- Yukon XL 1500 | 2001-2005 | Denali | 8 Cyl 6.0 L GAS
- Yukon XL 2500 | 2000-2005 | SLE, SLT | 8 Cyl 6.0 L GAS
View More
View related parts
GMC Oil Cooler Part Number: 12699792
$56.67 MSRP: $84.33
You Save: $27.66 (33%)
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Cooler, Engine Oil Cooler
- Replaces: 12698805
Fits the following GMC Models:
- Sierra 1500 | 2019-2020 | Base, Elevation, SLE | 4 Cyl 2.7 L GAS
View related parts
GMC Oil Cooler Part Number: 55509959
$66.55 MSRP: $99.03
You Save: $32.48 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Kit-Engine Oil; Cooler Kit, Engine Oil Cooler
Fits the following GMC Models:
- Sierra 1500 | 2020-2023 | AT4, AT4X, Denali, Denali Ultimate, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Yukon | 2021-2023 | Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Yukon XL | 2021-2023 | Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL
View More
View related parts
GMC Oil Cooler Part Number: 12733442
$91.94 MSRP: $136.82
You Save: $44.88 (33%)
ADD TO CART
Product Specifications
- Other Name: Cooler, Engine Oil Cooler
- Replaced by: 12738946
- Replaces: 12701170, 12729508
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
- Sierra 1500 | 2022-2023 | Elevation, Pro, SLE | 4 Cyl 2.7 L GAS
View related parts
GMC Transmission Cooler Part Number: 52487851
$69.90 MSRP: $230.58
You Save: $160.68 (70%)
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly, Transmission Fluid; Oil Cooler; Cooler Assembly; Cooler, Transmission Oil Cooler
- Replaces: 03059134, 03090586, 3090586, 52461116, 3059134
Fits the following GMC Models:
- Jimmy | 1995 | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Oil Cooler Part Number: 55595793
Product Specifications
- Other Name: Cooler Assembly-Engine Oil
Fits the following GMC Models:
- Canyon | 2016-2022 | All Terrain, AT4, Denali, Elevation, SLE, SLT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Power Steering Cooler Tube Part Number: 26049287
Product Specifications
- Other Name: Cooler, Power Steering Fluid
Fits the following GMC Models:
- C1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
GMC Power Steering Oil Cooler Part Number: 22950444
Product Specifications
- Other Name: Cooler, Power Steering Fluid; Power Steering Cooler; Power Steering Cooler Tube
- Replaces: 15789712
Fits the following GMC Models:
- Savana 1500 | 2003-2014 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Savana 2500 | 2003-2005 | Base, SLE | 8 Cyl 5.3 L GAS
View related parts
GMC Power Steering Oil Cooler Part Number: 26063304
Product Specifications
- Other Name: Cooler Assembly-Power Steering Fluid T; Power Steering Cooler; Cooler; Cooler, Power Steering Fluid
- Replaces: 15059945
Fits the following GMC Models:
- Savana 1500 | 1996-2002 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Savana 2500 | 1996-2002 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- Savana 3500 | 1996-2002 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View More
View related parts
GMC Oil Cooler Part Number: 15557751
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Cooler Assembly; Cooler, Engine Oil Cooler
Fits the following GMC Models:
- C1500 | 1988-1997 | Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1988-1997 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1988-1997 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K1500 | 1988-1997 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K2500 | 1988-1997 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1992-1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K3500 | 1988-1997 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
GMC Oil Cooler Part Number: 12734217
$266.41 MSRP: $398.22
You Save: $131.81 (34%)
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Cooler, Engine Oil Cooler
- Replaces: 12706188, 12701592
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2024 | AT4, AT4X, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Power Steering Oil Cooler Part Number: 15748885
Product Specifications
- Other Name: Cooler; Power Steering Cooler; Power Steering Cooler Tube; Cooler, Power Steering Fluid
Fits the following GMC Models:
- Savana 1500 | 2003-2007 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS
- Savana 2500 | 2003-2006 | Base, SLE | 6 Cyl 4.3 L GAS
View related parts
GMC Power Steering Cooler Tube Part Number: 26046913
Product Specifications
- Other Name: Coolr Power Steering; Cooler, Power Steering Fluid
Fits the following GMC Models:
- C2500 Suburban | 1997-1999 | Base, SLE, SLT | 8 Cyl 7.4 L GAS
- K2500 Suburban | 1997-1999 | Base, SLE, SLT | 8 Cyl 7.4 L GAS
View related parts
GMC Power Steering Cooler Part Number: 26015479
Product Specifications
- Other Name: Cooler, Power Steering Fluid; Cooler
Fits the following GMC Models:
- C1500 | 1989-1993 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS
- C2500 | 1989-1993 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS
- K1500 | 1989-1993 | Sierra, Sierra SLE, Sierra SLX, Sierra Sport | 6 Cyl 4.3 L GAS
- K2500 | 1989-1993 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS
View More
View related parts
GMC Power Steering Cooler Part Number: 26039521
Product Specifications
- Other Name: Cooler, Power Steering Fluid
Fits the following GMC Models:
- G2500 | 1994-1995 | Rally, Rally STX, Vandura | 8 Cyl 6.5 L DIESEL
- G3500 | 1994-1996 | Magnavan, Rally, Rally Camper Special, Rally STX, Vandura, Vandura Special | 8 Cyl 6.5 L DIESEL
- P3500 | 1994-1996 | Base | 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Power Steering Cooler Tube Part Number: 26049288
Product Specifications
- Other Name: Cooler, Power Steering Fluid
Fits the following GMC Models:
- C1500 Suburban | 1995-1996 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- C2500 Suburban | 1994-1996 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1995-1996 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- K2500 Suburban | 1994-1996 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Power Steering Cooler Part Number: 26046912
Product Specifications
- Other Name: Cooler, Power Steering Fluid; Cooler
Fits the following GMC Models:
- C1500 | 1989-1998 | Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS
- C2500 | 1989-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS
- K1500 | 1989-1998 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS
- K2500 | 1989-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS
View More
View related parts
GMC Power Steering Cooler Part Number: 26008478
Product Specifications
- Other Name: Cooler, Power Steering Fluid; Cooler, Hydraulic Brake System
Fits the following GMC Models:
- G3500 | 1988-1991 | Magnavan, Rally, Rally Camper Special, Rally STX, Vandura, Vandura Special | 8 Cyl 7.4 L GAS
- P3500 | 1988-1991 | Base, Value Van | 8 Cyl 7.4 L GAS
View related parts
GMC Power Steering Cooler Tube Part Number: 26049290
Product Specifications
- Other Name: Cooler, Power Steering Fluid
Fits the following GMC Models:
- C1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- C2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- K1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- K2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
View More

| Page 1 of 3 |Next >

1-20 of 50 Results

GMC Oil Cooler

Choose OEM Oil Cooler, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsGiant.com, you'll find it easy to get top-quality OEM GMC Oil Cooler. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Oil Cooler Parts and Q&A

Oil Cooler
19210615
Q: How to replace the Auxiliary Engine Oil Cooler on GMC Savana 2500?
A:
First, lift the hood to access the lines connected to the auxiliary Engine Oil Cooler and disconnect them. After that, take out the auxiliary Oil Cooler from the vehicle. While installing, install the auxiliary Oil Cooler first and then attach the Oil Cooler lines to the car before dropping your vehicle.
Oil Cooler
52484139
Q: How to properly install and service the oil cooler and its components for 6.0L and 8.1L engines on GMC Yukon?
A:
The Oil Cooler, which can be built into the Radiator or placed separately before it, has serviceable lines and hoses for the cooler. Start with the removal of the plastic caps from the quick connect fittings, pull back along the pipe. Clasp one end of the retaining clip with your hands and use a small pick-like tool or bent screwdriver to carefully pry off the opposite end from the quick connect fitting, rotate it and unfasten the entire clip and throw it away. For vehicles having a 6.0l engine, open the Oil Cooler hose clip in the fan shroud. Remove the hoses out of the clip and remove the hoses out of the quick connect of Radiator fittings. Lift the car and then undo the exhaust manifold pipe nuts and relocate the pipe. For 8.1l engine cars, disconnect the Oil Cooler hoses from the clip, pull the pipe fittings straight out, and take the vehicle off and support it. Take out the engine shield bolts and the shield itself if present. For the 6.0l engine, remove hose assembly bracket bolt and bracket bolts for Oil Cooler , this then takes out hose assembly and gasket discarding it but paying attention to the fittings and hoses for abuse. For the 8.1l engine, there is a hose bracket bolt that must be removed, quick connect fittings at the engine that are also removed along with the hose assembly and rocated along with the gasket is discarded and checked for damage. But you are to get a distinct snap during the installation while you are putting together the ends of the tube of the hose assembly with the quick connectors, test by pulling strongly in hardest to verify that the hose assembly is fully inserted. For the 8 1l engine, process the quick connect fittings at the engine, fasten the hose bracket bolt, and tighten it to 50 nm (37 ft. Lbs.). For 6.0l engine, fit in the hose assembly in addition to a new gasket; tighten the adapter bolts to (12 Nm (106 inch lbs.)) & hose bracket bolt to (25 Nm (18 ft. Lbs.)) mounting the engine shield and bolts if fitted with bolt to 20-nm (15 ft. Lbs.). Install the new retaining clip on the quick connect fitting properly using your thumb and forefinger pressing it engaged in all three slots and turning it in. Mount a new retaining clip to the remaining fitting, insert the pipe to the exhaust manifold, and tighten the nuts to 50 nm (37 ft. Lbs.). Lower the vehicle, then attach the hoses to the clip on the fan shroud and snap it shut, making sure there is a plastic end on the cooler line that goes into the fitting. For the 8.1l engine, install the hoses to the clip, connect the lines to the Radiator, and be sure the line is fully inserted into the quick connect fitting while there is a click that is heard or felt, followed by a sharp pull back to ensure that it is installed. Finally, place on the snap plastic cap to the fitting ensuring it's seated in place with even the smallest gap between the cap and the fitting.