How to replace the brake backing plate on GMC Savana 1500?

Before installing the new Brake Backing Plate, secure the pin into the park brake lever before using proper safety stands to elevate the vehicle. Begin by removing the tire and wheel and then move to remove the rear Brake Drum and rear brake shoes followed by rear Wheel Cylinder and rear brake anchor pin. The next step involves removing the rear Brake Backing Plate retaining bolts and washers to remove the Brake Backing Plate from the vehicle. Install the rear Brake Backing Plate by securing it with retaining bolts and washers tightened to 140 nm (104 ft. Lbs.). Apply high temperature silicone brake lubricant to all surfaces including Brake Shoe backing plate and its adjusting screw threads along with socket then socket face. Afterward install the rear brake shoes before moving onto the adjustment of rear brakes followed by hydraulic brake system bleeding. Reinstall the tire then the wheel before checking the park brake adjustment. Follow this braking sequence when the engine is off: apply the brake pedal two thirds of its total span and release it steadily for 15 seconds before repeating this procedure until you reach maximum braking force to achieve correct Wheel Cylinder and Brake Shoe positioning.

OEM GMC Savana 1500 Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Backing Plates found

View related parts
GMC Savana 1500 Backing Plate, Rear Part Number: 19178785
$16.94 MSRP: $51.43
You Save: $34.49 (68%)
ADD TO CART
Product Specifications
- Other Name: Shield, Rear Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Rear
- Replaces: 12476287
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 1500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Savana 1500 Backing Plate, Front Passenger Side Part Number: 25918338
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Dust Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Replaces: 15267358, 18061099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 1500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Savana 1500 Splash Shield, Passenger Side Part Number: 19211698
Product Specifications
- Other Name: Shield, Brake Flange Plate; ABS Wheel Speed Sensor; Brake Dust Shield; ABS Speed Sensor; ABS Sensor; Front Speed Sensor; Shield
- Position: Passenger Side
- Replaces: 15715340, 15649958, 15995206
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
GMC Savana 1500 Splash Shield, Driver Side Part Number: 19211697
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; ABS Sensor; Front Speed Sensor; Shield
- Position: Driver Side
- Replaces: 15715339
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
GMC Savana 1500 Backing Plate Part Number: 15650129
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
GMC Savana 1500 Backing Plate, Front Driver Side Part Number: 25918337
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Dust Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Replaces: 18061098
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 1500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Savana 1500 Backing Plate Part Number: 15650130
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

GMC Savana 1500 Brake Backing Plate

Want to cut long-term maintenance and repair costs? Choose OEM Brake Backing Plate. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Savana 1500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Savana 1500 Brake Backing Plate includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Savana 1500 Brake Backing Plate Parts and Q&A

Backing Plate
15650129
Q: How to replace the brake backing plate on GMC Savana 1500?
A:
Before installing the new Brake Backing Plate, secure the pin into the park brake lever before using proper safety stands to elevate the vehicle. Begin by removing the tire and wheel and then move to remove the rear Brake Drum and rear brake shoes followed by rear Wheel Cylinder and rear brake anchor pin. The next step involves removing the rear Brake Backing Plate retaining bolts and washers to remove the Brake Backing Plate from the vehicle. Install the rear Brake Backing Plate by securing it with retaining bolts and washers tightened to 140 nm (104 ft. Lbs.). Apply high temperature silicone brake lubricant to all surfaces including Brake Shoe backing plate and its adjusting screw threads along with socket then socket face. Afterward install the rear brake shoes before moving onto the adjustment of rear brakes followed by hydraulic brake system bleeding. Reinstall the tire then the wheel before checking the park brake adjustment. Follow this braking sequence when the engine is off: apply the brake pedal two thirds of its total span and release it steadily for 15 seconds before repeating this procedure until you reach maximum braking force to achieve correct Wheel Cylinder and Brake Shoe positioning.