Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19211697
Splash Shield, Driver Side

1991-2002 GM

Customer Questions & Expert Answers (9)
GM 19211697 Splash Shield, Driver Side
GM 19211697 Splash Shield, Driver Side
GM 19211697 Splash Shield, Driver Side
  • Part Description
    Shield, Brake Flange Plate; Brake Dust Shield; ABS Sensor
  • Position
    Driver Side
  • Replaces
    15715339
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 19211697 Splash Shield, Driver Side is Ref No. 3 in the diagram below

    1992 GMC K1500 Suburban Splash Shield, Driver Side Diagram for 19211697
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19211697

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19211697
    Part DescriptionShield, Brake Flange Plate; Brake Dust Shield; ABS Sensor
    Other NamesFront Speed Sensor; Shield
    Item Dimensions5.2 x 13.1 x 13.5 inches
    Item Weight3.10 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15715339
    ManufacturerGeneral Motors
    SKU19211697
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2000 Cadillac EscaladeBase8 Cyl 5.7 L GAS
    1991-1999 Chevrolet C1500454 SS, Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1995-1999 Chevrolet C2500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2002 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1996-2002 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1995-1999 Chevrolet K1500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1992-1999 Chevrolet K1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1995-1999 Chevrolet K2500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-2000 Chevrolet TahoeBase, Limited, LS, LT, Z718 Cyl 5.7 L GAS
    View More

  • Customer Questions & Expert Answers

    Q:
    Is this 19211697 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19211697 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the brake backing plate on GMC Savana 1500? Posted by Customer
    A:
    Before installing the new Brake Backing Plate, secure the pin into the park brake lever before using proper safety stands to elevate the vehicle. Begin by removing the tire and wheel and then move to remove the rear Brake Drum and rear brake shoes followed by rear Wheel Cylinder and rear brake anchor pin. The next step involves removing the rear Brake Backing Plate retaining bolts and washers to remove the Brake Backing Plate from the vehicle. Install the rear Brake Backing Plate by securing it with retaining bolts and washers tightened to 140 nm (104 ft. Lbs.). Apply high temperature silicone brake lubricant to all surfaces including Brake Shoe backing plate and its adjusting screw threads along with socket then socket face. Afterward install the rear brake shoes before moving onto the adjustment of rear brakes followed by hydraulic brake system bleeding. Reinstall the tire then the wheel before checking the park brake adjustment. Follow this braking sequence when the engine is off: apply the brake pedal two thirds of its total span and release it steadily for 15 seconds before repeating this procedure until you reach maximum braking force to achieve correct Wheel Cylinder and Brake Shoe positioning.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the second step after removing the linings for the 2000 Cadillac Escalade? Posted by Customer
    A:
    Remove the wheel cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the first step to replace the brake backing plate for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Raise and support the vehicle with suitable safety stands and remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the final step in the process for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the safety stands and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be done to the backing plate for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Unscrew the backing plate bolts and take off the backing plate from the axle housing flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be done after bleeding the hydraulic brake system for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Remove the pin from the park brake lever, then reinstall the tire and wheel, adjusting the park brake if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    How is the wheel speed sensor secured to the splash shield for the 2001 GMC Savana 2500? Posted by Customer
    A:
    It is secured with a plastic alignment tab and a nut/bolt at the top hole, which does not need to be removed for the assembly's removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What additional step is required for the 7300 lb. GVW (C6A) during installation for the 2001 GMC Savana 1500? Posted by Customer
    A:
    Install the harness rosebud clip at the upper control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19211697, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19211697 Splash Shield, Driver Side. It is sometimes referred to as GM Brake Backing Plate, GM Brake Dust Shields. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19211697 Splash Shield, Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery