OEM GMC Savana 1500 Throttle Cable

GMC Savana 1500 Throttle Cable Parts and Q&A

• Throttle Cable
  15281171
  Q: How to replace the throttle cable on GMC Savana 1500?

  A:

  The process of replacing the accelerator controls cable starts by removing the engine cover along with the air cleaner assembly. Remove the cable connecting the accelerator pedal to the throttle body lever before taking it away from the cable holder. Begin by unclipping the accelerator cable first from the engine sight shield mounting bracket and afterward from the generator bracket then remove the left instrument panel insulator. To replace the accelerator controls cable the accelerator cable retainer must be disconnected from the accelerator pedal lever through dash panel manipulation by squeezing the accelerator cable cover tangs after pushing the cable outside the panel. To attach the accelerator cable users should first pass it through the dash panel before pressing the accelerator cable cover tangs into position. Place the accelerator cable into the slot of the accelerator pedal lever and set the retainer into its proper position. Users should connect the accelerator cable to the throttle body lever while inserting this entire unit into the slot of the accelerator cable bracket. The engine sight shield mounting bracket's locking tab should then be snapped into position. Secure the accelerator cable on both the generator bracket and engine sight shield mounting bracket. Use pedal motion to check complete opening and shutting of the throttle while verifying smooth and boundary-free movements across full closed throttle and wide open throttle (WOT). After repairing the indicated components put back the left instrument panel insulator then install the engine cover and the air cleaner assembly.