How to replace the Throttle Position Sensor on GMC Savana 1500?

You should first remove the engine cover and the tp sensor harness connector, and proceed to remove the tp sensor attaching fasteners. The tp sensor is an electrical item, so any liquid cleaners or solvents should not come in contact with it. You should now remove the tp sensor from the Throttle Body assembly. Be sure the throttle valve is closed before attaching the tp sensor to the throttle shaft and rotating it as required to line up the holes. Put the attaching fasteners on the tp sensor and tighten them to 2.0 n.m (18.0 lb in), being careful not to overtighten them. Connect the tp sensor harness and put the engine cover back in place.

OEM GMC Savana 1500 Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Position Sensor found

View related parts
GMC Savana 1500 Throttle Position Sensor
Part Number: 17123852
Product Specifications
- Other Name: Sensor, Multi Portion Fuel Injection Throttle Position
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2007 GMC Savana 1500 | Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS

GMC Savana 1500 Throttle Position Sensor

Our website offers an extensive catalog of genuine GMC Savana 1500 Throttle Position Sensor at unbeatable prices. Every OEM GMC Savana 1500 Throttle Position Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Savana 1500 Throttle Position Sensor Parts Questions & Experts Answers

Throttle Position Sensor
17123852
Q: How to replace the Throttle Position Sensor on GMC Savana 1500?
A: You should first remove the engine cover and the tp sensor harness connector, and proceed to remove the tp sensor attaching fasteners. The tp sensor is an electrical item, so any liquid cleaners or solvents should not come in contact with it. You should now remove the tp sensor from the Throttle Body assembly. Be sure the throttle valve is closed before attaching the tp sensor to the throttle shaft and rotating it as required to line up the holes. Put the attaching fasteners on the tp sensor and tighten them to 2.0 n.m (18.0 lb in), being careful not to overtighten them. Connect the tp sensor harness and put the engine cover back in place.