Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2000 GMC Savana 1500 | Base, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
GMC Savana 1500 Turn Signal Switch
Our website offers an extensive catalog of genuine GMC Savana 1500 Turn Signal Switch at unbeatable prices. Every OEM GMC Savana 1500 Turn Signal Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Savana 1500 Turn Signal Switch Parts Questions & Experts Answers
Q: How to replace the Turn Signal Switch on GMC Savana 1500?
A: Before replacing the turn signal multifunction switch disconnect the sir system. Take off the wheel and both trim covers first before you move on. Unplug the turn signal and multifunction switch assembly connector then unscrew and remove the 2 screws to take out that assembly from the steering column tilt head unit. Place the turn signal and multifunction switch assembly onto the steering column tilt head assembly and fasten it with both screws until they reach 3 nm torque. Reattach the electrical connection for the turn signal and multifunction switch and put back the upper and lower trim covers plus the Steering Wheel. Finally, enable the sir system.