Other Name: Module Assembly-Electronic Brake Control (W/Brake Pressure Mode; ABS Control Module; Modulator Valve; ABS Control Unit; Pressure Modulator Valve; Module, Electronic Brake Control
Replaced by: 85719285
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2018-2024 GMC Savana 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L GAS
Other Name: Module Kit, Electronic Brake Control (Ebcm); ABS Control Module; Module Kit, Electronic Brake Control
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2002 GMC Savana 2500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
| Page 1 of 2 |Next >
1-20 of 21 Results
GMC Savana 2500 ABS Control Module
Our website offers an extensive catalog of genuine GMC Savana 2500 ABS Control Module at unbeatable prices. Every OEM GMC Savana 2500 ABS Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Savana 2500 ABS Control Module Parts Questions & Experts Answers
Q: How to replace the ABS Control Module on GMC Savana 2500?
A: The replacement process of the ABS Control Module starts by disconnecting the negative Battery Cable. Support the vehicle while raising it then detach both brake modulator shield mounting nuts as well as the bolt if present. The process of cleaning should start by wiping away all dirt and debris from around the ABS Control Module and brake pressure modulator valve (BPMV) before unconnecting the ABS Control Module electrical connector. After removing the ABS Control Module bolts you should thoroughly remove the ABS Control Module from its position on the bpmv. The bpmv sealing surface needs denatured alcohol cleaning together with a new shop cloth. I will place the fresh ABS Control Module onto the bpmv without using excessive force on its components. Use new ABS Control Module bolts to attach the component and implement a cross-pattern installation torquing it to 3 nm (27 lb in). The process includes attaching the ABS Control Module electrical connector followed by brake modulator shield installation with mounting nuts fixed at 25 nm (18 lb ft) and finally securing the brake modulator shield mounting bolt to 25 nm (18 lb ft). Drop the vehicle while connecting the negative terminal cable. Program and setup information can be found through control module references.