Other Name: Coil Assembly-Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil, Inflatable Restraint System
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2010 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
GMC Savana 2500 Air Bag Clockspring
Our website offers an extensive catalog of genuine GMC Savana 2500 Air Bag Clockspring at unbeatable prices. Every OEM GMC Savana 2500 Air Bag Clockspring comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Savana 2500 Air Bag Clockspring Parts Questions & Experts Answers
Q: How to replace the Air Bag Clockspring on GMC Savana 2500?
A: The air bag clock spring assembly replacement process starts with an air bag system disablement followed by steering column trim cover removal. Remove the wire harness assembly from its wire harness strap before taking off each wire harness strap attached to the assembly then taking off the wire harness strap from the upper tilt head assembly. Start by taking out the retaining clip for the air bag clock spring followed by the clock spring itself. After this remove the wave washer from the upper shaft of the steering column. Position the block tooth on the upper shaft at the 12 o'clock mark before securing all fasteners then tighten using specified torque to maintain component integrity. The installer should put the wave washer onto the steering column upper shaft while monitoring that the air bag clock spring stays centered. The installation process needs to avoid making the clock spring become uncentered. Position the air bag clock spring correctly against the horn tower of the turn signal cancel cam before you place the pre-centered air bag clock spring onto the steering column upper shaft. To avoid shaft lock mechanism interference discard the centering tab and gently straighten the lower clock spring assembly wire before installation. Trap the air bag clock spring retaining ring into the upper shaft groove before continuing. After securing first the wire harness assembly to the wire strap then the wire harness strap to the wire strap complete the procedure by attaching the wire harness straps to the wire harness assembly. Replace the trim covers on the steering column then activate the air bag system.