How to replace the wiper motor on GMC Savana 2500?

Start replacing the wiper motor by getting both the Wiper Transmission Separator (J 39232) and Wiper Transmission Installer (J 39529). Start by taking off both wiper arms together with the air inlet grille panel. Unplug the wiper motor electrical connector but keep it attached to the module. Then remove the four mounting bolts and take the entire wiper system drive module out of the car. The new wiper motor installation starts by using the Wiper Transmission Separator (J 39232) to disconnect the wiper motor crank arm from the drive link then removing its two retaining bolts and pulling the motor out of the wiper drive system module. Install the new wiper motor onto the wiper drive system module and fasten it with two bolts while tightening the bolts to 8Nm of torque (71inch pounds). Replace both drive link ends on the wiper arm using the Wiper Transmission Installer before you put back the wiper drive system module and fasten it with four bolts at 8 N.m (71 lb in). Connect the wiper motor electrical connector and put back the air inlet grille panel and the wiper arms. Check whether the wipers work correctly by turning them on.

OEM GMC Savana 2500 Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wiper Motors found

View related parts
GMC Savana 2500 Wiper Motor
Part Number: 84039192
$221.39 MSRP: $397.11
You Save: $175.72 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Windshield Wiper System; Wiper Linkage; Wiper Transmission; Motor & Linkage; Module, Windshield Wiper Motor
- Replaces: 22858850, 15874973
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2024 GMC Savana 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 2500 Wiper Motor
Part Number: 88958135
Product Specifications
- Other Name: Motor, Windshield Wiper; Motor; Motor, Windshield Wiper Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2007 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Wiper Motor
Part Number: 19169125
Product Specifications
- Other Name: Motor Assembly, Windshield Wiper; Motor; Motor, Windshield Wiper Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2014 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Wiper Motor
Part Number: 12487586
Product Specifications
- Other Name: Motor Assembly, Windshield Wiper; Motor; Motor, Windshield Wiper Motor
- Replaces: 22144497
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 2500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL

GMC Savana 2500 Wiper Motor

Our website offers an extensive catalog of genuine GMC Savana 2500 Wiper Motor at unbeatable prices. Every OEM GMC Savana 2500 Wiper Motor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Savana 2500 Wiper Motor Parts Questions & Experts Answers

Wiper Motor
12487586
Q: How to replace the wiper motor on GMC Savana 2500?
A: Start replacing the wiper motor by getting both the Wiper Transmission Separator (J 39232) and Wiper Transmission Installer (J 39529). Start by taking off both wiper arms together with the air inlet grille panel. Unplug the wiper motor electrical connector but keep it attached to the module. Then remove the four mounting bolts and take the entire wiper system drive module out of the car. The new wiper motor installation starts by using the Wiper Transmission Separator (J 39232) to disconnect the wiper motor crank arm from the drive link then removing its two retaining bolts and pulling the motor out of the wiper drive system module. Install the new wiper motor onto the wiper drive system module and fasten it with two bolts while tightening the bolts to 8Nm of torque (71inch pounds). Replace both drive link ends on the wiper arm using the Wiper Transmission Installer before you put back the wiper drive system module and fasten it with four bolts at 8 N.m (71 lb in). Connect the wiper motor electrical connector and put back the air inlet grille panel and the wiper arms. Check whether the wipers work correctly by turning them on.