Other Name: Hose Assembly-A/C Compressor; A/C Refrigerant Liquid Hose; Suction Line; Hose, A/C Compressor Suction And Discharge
Replaces: 23364993
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2018-2024 GMC Savana 3500 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
| Page 1 of 3 |Next >
1-20 of 43 Results
GMC Savana 3500 A/C Hose
Our website offers an extensive catalog of genuine GMC Savana 3500 A/C Hose at unbeatable prices. Every OEM GMC Savana 3500 A/C Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Savana 3500 A/C Hose Parts Questions & Experts Answers
Q: How to replace the Front A/C Hose on GMC Savana 3500?
A: Recovery of refrigerant must be performed first before proceeding to replace the front tube of the air conditioning Evaporator. Start by removing the coolant recovery reservoir and after that take off the grille on the vehicle front. You must detach the front Evaporator hose nut from the condenser and the Evaporator inlet hose nut from the front Evaporator tube hose. Then you can remove the Evaporator inlet hose from the front hose and the nut from the rear Evaporator (if equipped). Next remove the front Evaporator hose from the vehicle while also taking out the sealing washers. To install the system start by adding new sealing washers before inserting the front Evaporator tube into the vehicle while connecting it to the rear Evaporator tube. You should install the retaining nut on the rear Evaporator tube (if your vehicle has this component) to a torque of 16 nm (12 lb ft). Fasten the Evaporator inlet hose to the front Evaporator tube through the inlet hose nut before tightening it to 16 nm (12 lb ft). Placing the front Evaporator tube along the condenser requires tightening its front Evaporator tube nut to 16 nm (12 lb ft). The procedure ends with reinstalling the grille along with the coolant recovery reservoir. Evacuation and recharge the a/c system while conducting leak detection scanning on all fitted components through the use of j 39400-a halogen leak detector.