How to replace the Turn Signal Switch and multifunction switch on GMC Savana 3500?

You need to disable the SIR system before working on the turn signal and multifunction switch. Separate the upper and lower dashboard covers while remembering how the connector connects to the abrasion sleeve of the steering column wire harness. Take the wire harness assembly off its strap and disconnect the turn signal and multifunction switch connections from the coil connector of the SIR system. Extract both connectors of the turn signal and multifunction switch from the bulkhead connection point. Take the two pan head screws from the turn signal and multifunction switch assembly and remove the assembly from the steering column tilt head unit. Install the turn signal and multifunction switch assembly on the steering column tilt head by placing it down and matching the electrical contact to the turn signal cancel cam. Fasten the unit using the two pan head screws and ensure top screw at 3Nm and side screw at 7 Nm torque settings. Insert the two connectors into the bulkhead connector and join the turn signal and multifunction switch assembly connector to SIR coil connector. Put the steering column wire harness assembly back in place by securing it into the harness strap. Keep the ignition lock cylinder case wires and connector in their proper position while inserting the assembly. Put on the upper and lower trim pieces then make the SIR system active again.

OEM GMC Savana 3500 Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Turn Signal Switches found

View related parts
GMC Savana 3500 Turn Signal Switch
Part Number: 25778641
$39.14 MSRP: $56.98
You Save: $17.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp/Fog Lamp/Turn Signal; Multi Purpose Switch; Combination Switch; Multifunction Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2024 GMC Savana 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 3500 Turn Signal Switch
Part Number: 26100985
$259.01 MSRP: $422.58
You Save: $163.57 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp Dimmer; Windshield Washer Switch; Multi Purpose Switch; Combination Switch; Headlamp Dimmer; Signal; Wiper & Washer Control; Turn Signal Lamp.
- Replaces: 26083629, 26047330, 26097019, 26097021, 26091771, 26083627, 26091769, 26054727
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2000 GMC Savana 3500 | Base, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC Savana 3500 Turn Signal Switch
Part Number: 26102159
$173.43 MSRP: $541.10
You Save: $367.67 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Combination Switch; Headlamp Dimmer Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Replaces: 26096838, 26075065
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 GMC Savana 3500 | Base, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Turn Signal Switch
Part Number: 1999411
$85.22 MSRP: $166.06
You Save: $80.84 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly Turn/Signal & Headlamp Dimmer, Wiper & Washer (W/ Lever); Multi Purpose Switch; Combination Switch; Windshield Wiper & Washer Control; Headlamp/Fog Lamp/Turn Signal; Turn Signal Lamp; Headlamp Dimmer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2007 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Turn Signal Switch
Part Number: 1999410
$104.18 MSRP: $157.14
You Save: $52.96 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/ Lever); Multi Purpose Switch; Combination Switch; Windshield Wiper & Washer Control; Headlamp/Fog Lamp/Turn Signal; Turn Signal Lamp; Headlamp Dimmer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2007 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Turn Signal Switch
Part Number: 26102160
$190.41 MSRP: $366.36
You Save: $175.95 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Switch; Combination Switch; Headlamp Dimmer; Wiper & Washer Control; Turn Signal Lamp.
- Replaces: 26075066, 26096839
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 GMC Savana 3500 | Base, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Turn Signal Switch
Part Number: 26100986
$227.31 MSRP: $367.63
You Save: $140.32 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp Dimmer; Windshield Washer Switch; Multi Purpose Switch; Combination Switch; Headlamp Dimmer Switch; Signal Switch; Wiper & Washer Control; Turn Signal Lamp Switch.
- Replaces: 26083628, 26054726, 26054728, 26091770, 26083630, 26097022, 26047331, 26091772, 26097020
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2000 GMC Savana 3500 | Base, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

GMC Savana 3500 Turn Signal Switch

Our website offers an extensive catalog of genuine GMC Savana 3500 Turn Signal Switch at unbeatable prices. Every OEM GMC Savana 3500 Turn Signal Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Savana 3500 Turn Signal Switch Parts Questions & Experts Answers

Turn Signal Switch
1999411
Q: How to replace the Turn Signal Switch and multifunction switch on GMC Savana 3500?
A: You need to disable the SIR system before working on the turn signal and multifunction switch. Separate the upper and lower dashboard covers while remembering how the connector connects to the abrasion sleeve of the steering column wire harness. Take the wire harness assembly off its strap and disconnect the turn signal and multifunction switch connections from the coil connector of the SIR system. Extract both connectors of the turn signal and multifunction switch from the bulkhead connection point. Take the two pan head screws from the turn signal and multifunction switch assembly and remove the assembly from the steering column tilt head unit. Install the turn signal and multifunction switch assembly on the steering column tilt head by placing it down and matching the electrical contact to the turn signal cancel cam. Fasten the unit using the two pan head screws and ensure top screw at 3Nm and side screw at 7 Nm torque settings. Insert the two connectors into the bulkhead connector and join the turn signal and multifunction switch assembly connector to SIR coil connector. Put the steering column wire harness assembly back in place by securing it into the harness strap. Keep the ignition lock cylinder case wires and connector in their proper position while inserting the assembly. Put on the upper and lower trim pieces then make the SIR system active again.