Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Tank Pressure Sensor; Level Sensor; Tank Pressure Sensor; Sensor; Sensor, Early Fuel Evaporation; Sensor, Fuel Tank Meter/Pump
Position: Passenger Side
Replaces: 13502510
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2009-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Hybrid, Pro, SL, SLE, SLT, WT, XFE | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Sensor Assembly-Fuel Pressure; Fuel Injection Pressure Sensor; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Sensor, Computer Control Sensors; Sensor, Fuel Tank Meter/Pump
Replaces: 15239857
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2009 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
GMC Sierra 1500 Fuel Pressure Sensor
Our website offers an extensive catalog of genuine GMC Sierra 1500 Fuel Pressure Sensor at unbeatable prices. Every OEM GMC Sierra 1500 Fuel Pressure Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sierra 1500 Fuel Pressure Sensor Parts Questions & Experts Answers
Q: How to replace the fuel pressure sensor on GMC Sierra 1500?
A: A proper replacement of the Fuel Pressure Sensor begins with elevating and supporting the vehicle. The Fuel Pressure Sensor requires removal of the chassis wiring harness electrical connector. A shop towel should be wrapped around the Fuel Pressure Sensor fitting to catch leaking fuel but remove the sensor from the fuel line after which discard the o-ring seal. Apply clean engine oil to the new Fuel Pressure Sensor o-ring before placing it onto its corresponding fuel line fitting. A shop towel wrapped around the Fuel Pressure Sensor should be used for leak absorption before removing it from the fuel line. Place the Fuel Pressure Sensor on the fuel line with gentle torque of 15 nm (11 lb ft). Integrate the chassis wiring harness electrical connector to the Fuel Pressure Sensor while the vehicle is lowered downward. After turning on the ignition with engine off for 2 seconds, the user must let the ignition run for 10 seconds. Repeat the ignition turn on process with the engine off to check for fuel leakage.