Other Name: Switch Assembly-Headlamp & Instrument Panel Lamp Dimmer & Dome Lamp; Multi Purpose Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Switch, Headlamp
Replaces: 15096895, 15926099
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2013 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Switch, Headlamp/Fog Lamp/Turn Signal; Multi Purpose Switch; Multifunction Switch; Windshield Wiper & Washer Control; Turn Signal Lamp; Headlamp Dimmer
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2013 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Switch Assembly-Headlamp & Instrument Panel Lamp Dimmer & Dome Lamp; Multi Purpose Switch; Switch, Headlamp/Fog Lamp/Turn Signal
Replaces: 15926101
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2013 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Switch Assembly-Headlamp & Instrument Panel Lamp Dimmer & Dome Lamp; Multi Purpose Switch; Headlight Switch; Switch, Headlamp/Fog Lamp/Turn Signal
Replaces: 15926100
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2013 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Switch Assembly-Accessory; Windshield Washer Switch; Adjuster Switch; Switch, Headlamp/Fog Lamp/Turn Signal
Replaces: 15907026
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2013 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Switch Assembly-Accessory; Windshield Washer Switch; Switch, Headlamp/Fog Lamp/Turn Signal
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2009-2010 GMC Sierra 1500 | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
| Page 1 of 2 |Next >
1-20 of 21 Results
GMC Sierra 1500 Turn Signal Switch
Our website offers an extensive catalog of genuine GMC Sierra 1500 Turn Signal Switch at unbeatable prices. Every OEM GMC Sierra 1500 Turn Signal Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sierra 1500 Turn Signal Switch Parts Questions & Experts Answers
Q: How to replace the Turn Signal Switch on GMC Sierra 1500?
A: Disabling the SIR system requires specific safety steps before working on the turn signal switch. Take off the trim pieces from above and below before disconnecting the wire harness assembly from its strap. You should put back the abrasion sleeve on the wire harness assembly of the steering column and record where the connector goes for installation. Separate the SIR system coil connector from the two connectors (Turn Signal and Multifunction Switch Assembly) to release them from the bulkhead connector (Bulkhead Connector). Unfasten the two pan head tapping screws from the turn signal and multifunction switch assembly before taking it out of the steering column tilt head assembly. Set the turn signal and multifunction switch assembly onto the steering column tilt head assembly. Attach it with the two pan head tapping screws (Pan Head Tapping Screws) by tightening the top screw to 3 Nm (27 inch lbs.) for Domestic Column Shift or 7 Nm (62 inch lbs.) for Domestic Floor Shift and Export Column Shift while adjusting the side screw to 7 Nm (62 inch lbs.) for any configuration. The turn signal and multifunction switch assembly should maintain its electrical contact with the turn signal cancel cam assembly base. Put the connector ends of the Turn Signal and Multifunction Switch Assembly into the Bulkhead Connector and dock it to the SIR coil connector. Put the wire harness assembly back into the wire harness strap while lowering the connector and ignition cylinder case wires into the sleeve correctly. Put back the upper and lower trim parts then reactivate the SIR system.