How to replace the clutch release bearing on GMC Sierra 3500?

To replace the clutch Release Bearing, first remove the manual transmission and then remove the clutch release by rotating it in either direction thus releasing the compression spring preload pushing the Release Bearing o the end of the clutch activator bearing. Next, with a clean dry cloth clean the exposed area of the actuator cylinder quill, avoiding the use of cleaners, chemicals or grease on the quill. Replace the new clutch release there-by to clutch actuator cylinder by applying firm pressure to push the clutch release to the snap over the retainer tab, where it self retains to the actuator cylinder. Finally, reinstall the manual transmission.

OEM GMC Sierra 3500 Release Bearing

Clutch Release Throw Out Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Release Bearing found

View related parts
GMC Sierra 3500 Release Bearing
Part Number: 19299097
$56.47 MSRP: $100.84
You Save: $44.37 (44%)
Product Specifications
- Other Name: Bearing, Clutch Release; Clutch Release Bearing; Clutch Kit; Bearing, Engine Clutch Release Fork; Bearing, Clutch Throw Out
- Replaces: 88934649
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS

GMC Sierra 3500 Release Bearing

Our website offers an extensive catalog of genuine GMC Sierra 3500 Release Bearing at unbeatable prices. Every OEM GMC Sierra 3500 Release Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Sierra 3500 Release Bearing Parts Questions & Experts Answers

Release Bearing
19299097
Q: How to replace the clutch release bearing on GMC Sierra 3500?
A: To replace the clutch Release Bearing, first remove the manual transmission and then remove the clutch release by rotating it in either direction thus releasing the compression spring preload pushing the Release Bearing o the end of the clutch activator bearing. Next, with a clean dry cloth clean the exposed area of the actuator cylinder quill, avoiding the use of cleaners, chemicals or grease on the quill. Replace the new clutch release there-by to clutch actuator cylinder by applying firm pressure to push the clutch release to the snap over the retainer tab, where it self retains to the actuator cylinder. Finally, reinstall the manual transmission.

Related GMC Sierra 3500 Parts

Browse GMC Sierra 3500 Release Bearing by Years

2006 2005 2004 2003 2002 2001