How to replace the wiper motor on GMC Sonoma?

To install the Wiper Motor begin by taking out the wiper arms plus the air inlet grille panel. Apply the wiper transmission separator part j39232 to disconnect both transmission and Wiper Motor drive link. Unplug the Wiper Motor cable and unscrew its three bolts before taking out the Wiper Motor from the vehicle. Install the new Wiper Motor into its position by fitting the three screws and turning them until torque reaches 6.5 n.m (57 lb in). Join the electrical wires back in place and apply white lithium grease (GM P/N 9985885) or equivalent into the socket. Fit the wiper transmission onto the crank arm after the second detent until it pushes the seal to 25.5 mm (1 inch) maximum compression. Set the wiper transmission installer j 39529 on the crank arm ball to put on the transmission drive link socket. After that put back the wiper arms and air inlet grille panel.

OEM GMC Sonoma Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wiper Motors found

View related parts
GMC Sonoma Wiper Motor
Part Number: 88961173
Product Specifications
- Other Name: Motor Assembly, Windshield Wiper; Front Motor; Motor; Motor, Windshield Wiper Motor
- Replaces: 22062913, 22049816
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 GMC Sonoma | Base, GT, SL, SLE, SLS | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Sonoma Wiper Motor
Part Number: 88961296
Product Specifications
- Other Name: Motor Assembly, Windshield Wiper; Front Motor; Motor; Motor, Windshield Wiper Motor
- Replaces: 22062915
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 GMC Sonoma | Base, GT, SLE, SLS | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Sonoma Wiper Motor, Rear
Part Number: 22086558
Product Specifications
- Other Name: Motor, Rear Window Wiper; Rear Motor; Motor; Motor, Rear Window Wiper/Washer
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 GMC Sonoma | Base, GT, SL, SLE, SLS | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Sonoma Wiper Motor, Rear
Part Number: 19210076
Product Specifications
- Other Name: Motor Assembly, Rear Window Wiper; Rear Motor; Motor, Rear Window Wiper/Washer
- Position: Rear
- Replaces: 22154965, 12365368, 12494790, 15053983
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2004 GMC Sonoma | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Sonoma Front Motor
Part Number: 19151963
Product Specifications
- Other Name: Motor Assembly, Windshield Wiper; Wiper Motor; Motor
- Replaces: 12368695, 22121967
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 GMC Sonoma | SL, SLE, SLS | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Sonoma Front Motor
Part Number: 15036008
Product Specifications
- Other Name: Motor, Windshield Wiper Motor; Motor; Wiper Motor
- Replaces: 12365319, 12368703
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2004 GMC Sonoma | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

GMC Sonoma Wiper Motor

Our website offers an extensive catalog of genuine GMC Sonoma Wiper Motor at unbeatable prices. Every OEM GMC Sonoma Wiper Motor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Sonoma Wiper Motor Parts Questions & Experts Answers

Front Motor
15036008
Q: How to replace the wiper motor on GMC Sonoma?
A: To install the Wiper Motor begin by taking out the wiper arms plus the air inlet grille panel. Apply the wiper transmission separator part j39232 to disconnect both transmission and Wiper Motor drive link. Unplug the Wiper Motor cable and unscrew its three bolts before taking out the Wiper Motor from the vehicle. Install the new Wiper Motor into its position by fitting the three screws and turning them until torque reaches 6.5 n.m (57 lb in). Join the electrical wires back in place and apply white lithium grease (GM P/N 9985885) or equivalent into the socket. Fit the wiper transmission onto the crank arm after the second detent until it pushes the seal to 25.5 mm (1 inch) maximum compression. Set the wiper transmission installer j 39529 on the crank arm ball to put on the transmission drive link socket. After that put back the wiper arms and air inlet grille panel.