How to replace the rod bearing in an engine on GMC Terrain?

In order to remove the Piston, the connecting rod and the bearing, perform the following: remove the oil pank and the Cylinder Head. In the case a ring ridge exists then turn the Crankshaft until the Piston is in the lower part of the stroke then put a cloth on top of the Piston and remove using the j 24270 the ring ridge. After that, rotate the Crankshaft to the top stroke, eliminate the cloth and debris as well as to mark the connecting rods and caps for assembly. Next, unbolt the connecting rod nuts, are curling nut and cap, discarding the bolts and nuts, and remove rod and Piston from the engine block with the j-43966-1. Depress the Piston to its top dead center, clean out the cylinder bores with a detergent and hot water or light honing then bring the Piston back to it's lowest point and swab the bore with engine oil and a clean dry cloth. For installation, engine oil should be applied on the Piston, the Piston rings, the cylinder bore, and the bearing surfaces, and then the Piston should be inserted in its original bore using the j-43966-1 gently tapping the top with a wooden hammer handle. Make sure stamped mark on the Piston faces the front of the engine, press the j 8037 against the engine block until all Piston rings get into the cylinder bore, and fit the connecting rod caps onto original rods with the previously marked numbers aligned. Install new connecting bolt and nuts, tighten up to 25 nm (18 lb ft) evenly the first time and use the j 45059 to tighten another 100 degrees on the final pass. Check the connecting rod side clearance with feeler gauge (0.070-0.370 mm, 0.0027-0.0145 in). Finally, install the Cylinder Head and the Oil Pan.

OEM GMC Terrain Rod Bearing

Engine Connecting Rod Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Rod Bearings found

View related parts
GMC Terrain Connecting Rod Bearing Part Number: 12657438
$12.31 MSRP: $19.55
You Save: $7.24 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Kit, Connecting Rod; Bearing Set
- Replaced by: 12668645
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 GMC Terrain | Denali, SLE, SLT | 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Connecting Rod Bearing Part Number: 12674806
$2.20 MSRP: $3.63
You Save: $1.43 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Kit, Engine Connecting Rod; Rod Bearing; Bearing Set; Bearings
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2023 GMC Terrain | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS
View related parts
GMC Terrain Connecting Rod Bearing Part Number: 12643667
$10.51 MSRP: $17.32
You Save: $6.81 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Kit, Engine Connecting Rod; Rod Bearing; Bearing; Bearings
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 GMC Terrain | Denali, SLE, SLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Terrain Bearings Part Number: 12636003
$10.36 MSRP: $17.07
You Save: $6.71 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Kit, Connecting Rod; Bearing Kit, Engine Connecting Rod; Bearing, Engine Connecting Rod
- Replaces: 12598657
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 GMC Terrain | SLE, SLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
GMC Terrain Bearing Set, Green Line Part Number: 12591093
$42.83 MSRP: $72.96
You Save: $30.13 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Kit, Connecting Rod; Rod Bearing; Bearings; Bearing Kit, Engine Connecting Rod
- Replaces: 21018825
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
GMC Terrain Bearing Part Number: 55588336
$97.18 MSRP: $152.23
You Save: $55.05 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Kit, Engine Connecting Rod; Rod Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 GMC Terrain | SLE, SLT | 4 Cyl 1.6 L DIESEL
View related parts
GMC Terrain Bearing Part Number: 55588335
$29.00 MSRP: $45.42
You Save: $16.42 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Kit, Engine Connecting Rod; Rod Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 GMC Terrain | SLE, SLT | 4 Cyl 1.6 L DIESEL

GMC Terrain Rod Bearing

Want to cut long-term maintenance and repair costs? Choose OEM Rod Bearing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Terrain parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Terrain Rod Bearing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The GMC Terrain Rod Bearing is one of the greatest inventions that directly impacts the durability and efficiency of the GMC Terrain models. Intended for the crankshaft and or the camshaft, these Rod Bearings are defined by high levels of design engineering, being made from bi-metal or tri-metal to support the need for oil clearance for the best operation of the automobile. Due to their specific design they haveLINING material, that provides the necessary lubrication, which is very important for the state and performance of an engine. The GMC Terrain is a comfortable automobile suitable for families, and it has powerful and fuel-efficient engines; the discussed Rod Bearing is a valuable component that has a positive impact on the car's performance and safety features for different models of the GMC Terrain. In both the basic LUV 2.4 L edition and the G TOM 3.6 L V6 Denali edition of the GMC Terrain Rod Bearing, it facilitates the rotation of the engine efficiently while preventing its wear commonly observed in other car brands. Besides, the fact that this Rod Bearing can fit different variants of Terrain shows the need for automotive elements in the market, which is why reliability is crucial here. Other elements, like dry film coatings in performance variants, for instance, add to the GMC Terrain Rod Bearing mechanical highlights, thus making it even more suitable for users in search of a powerful part that will last longer than most others in the market. All in all, the GMC Terrain Rod Bearing is one of the best examples that shows that GMC does its best to provide only the top-tier quality of its products and services, as well as gives the maximum to develop innovation in the automotive industry.

GMC Terrain Rod Bearing Parts and Q&A

Bearing Set, Green Line
12591093
Q: How to replace the rod bearing in an engine on GMC Terrain?
A:
In order to remove the Piston, the connecting rod and the bearing, perform the following: remove the Oil Pank and the Cylinder Head. In the case a ring ridge exists then turn the Crankshaft until the Piston is in the lower part of the stroke then put a cloth on top of the Piston and remove using the j 24270 the ring ridge. After that, rotate the Crankshaft to the top stroke, eliminate the cloth and debris as well as to mark the connecting rods and caps for assembly. Next, unbolt the connecting rod nuts, are curling nut and cap, discarding the bolts and nuts, and remove rod and Piston from the engine block with the j-43966-1. Depress the Piston to its top dead center, clean out the cylinder bores with a detergent and hot water or light honing then bring the Piston back to it's lowest point and swab the bore with engine oil and a clean dry cloth. For installation, engine oil should be applied on the Piston, the Piston rings, the cylinder bore, and the bearing surfaces, and then the Piston should be inserted in its original bore using the j-43966-1 gently tapping the top with a wooden hammer handle. Make sure stamped mark on the Piston faces the front of the engine, press the j 8037 against the engine block until all Piston rings get into the cylinder bore, and fit the connecting rod caps onto original rods with the previously marked numbers aligned. Install new connecting bolt and nuts, tighten up to 25 nm (18 lb ft) evenly the first time and use the j 45059 to tighten another 100 degrees on the final pass. Check the connecting rod side clearance with feeler gauge (0.070-0.370 mm, 0.0027-0.0145 in). Finally, install the Cylinder Head and the Oil Pan.