Other Name: Handle Kit-Front Side Door Outside; Exterior Door Handle; Handle Kit, Door Outside Handle; Handle, Door Outside Handle; Handle, Exterior Door
Position: Front
Replaces: 13583889
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2015-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Handle Assembly-Roof Rail Assist *Atmosphere; Handle, Assist Handle
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
| Page 1 of 8 |Next >
1-20 of 149 Results
GMC Yukon Door Handle
Our website offers an extensive catalog of genuine GMC Yukon Door Handle at unbeatable prices. Every OEM GMC Yukon Door Handle comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Yukon Door Handle Parts Questions & Experts Answers
Q: How to replace the rear door exterior door handle on GMC Yukon?
A: The replacement process of rear door exterior handle starts by removing both trim panel and water deflector. Start by detaching the outside handle rod from its rod clip and the lock cylinder rod from the clip which holds it. Begin by securing the handle onto the outside of the door with masking tape and then take out the outside handle mounting nuts. A hole in the rubber cover exposes the outboard nut for access so remove the door-lock cylinder from the outside handle housing. Resolve any binding issues with the lock cylinder according to its needs. Install the new handle onto the vehicle as a final step after handle removal. The replacement lock cylinder requires application of gm p/n 12345120, canadian p/n 726548 or equivalent lubricant into the lock case interior and the keyway area. Take the door-lock cylinder and insert it into the outside handle housing before you attach the lock cylinder clip onto the rod. Fasten the handle rod to its assembly clip while tightening outside handle mounting nuts to 9 n.m (80 lb in). Reinstall the rubber cover together with the water deflector and the trim panel.