How to replace the torsion bar on GMC Yukon XL 2500?

To change the Torsion Bar, first, lift and secure the vehicle. Connect the Torsion Bar unloading/loading tool (J 36202) to the adjustment arm and the cross members, and then pull the adjustment arm to the point that the tension is relieved from the adjustment bolt and the adjuster nut. Mark the adjustment bolt and turn the number of turns required to eliminate the bolt. Next, take off and adjuster nut and then the adjustment bolt for mn8, mt1 and mw3. Having removed the j 36202, let it release and slide it out forward, releasing the adjustment arm and supporting it. First, you need to remove all bolts from the and the Torsion Bar crossmember weld nuts and then the upper links nuts and bolts followed by the removal of Torsion Bar cross member taking note of the position of the left Torsion Bar and right Torsion Bar as they differ. For installation, install the torsion bars on to the lower Control Arm, and install Torsion Bar cross member. Secure the Torsion Bar crossmember bolts to the weld nuts and torque them to 95 nm (70 ft. Lbs.). Then attach the upper mount nuts and bolts, tighten the nut to 95 nm (70 ft lbs.). Moving to the support of the adjustment arm, slide the Torsion Bar rearward until it is complete and attached the j 36202 to the adjustment arm and the crossmember. Tighten up the tension in the adjustment arm in order to load the Torsion Bar, and put in the adjustment bolt and adjuster nut, making sure you use the same number of turns as you removed. Finally, retract the j36202 and leave the tension on the Torsion Bar to be consumed by the adjustment bolt, remove the safe stands, and lower the vehicle down another control the z height, if the z height is low to be raised, twist the adjustment bolt clockwise or to increase z height or to lower z height twist the adjustment bolt counterclockwise.

OEM GMC Yukon XL 2500 Torsion Bar

Suspension Torsion Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Torsion Bars found

View related parts
GMC Yukon XL 2500 Torsion Bar, Front Driver Side
Part Number: 19330060
$286.89 MSRP: $451.40
You Save: $164.51 (37%)
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion; Ball Joint; Lower Ball Joint; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15528965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Torsion Bar, Front Passenger Side
Part Number: 19330059
$286.89 MSRP: $451.40
You Save: $164.51 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion; Ball Joint; Lower Ball Joint; Bar, Front Chassis
- Position: Front Passenger Side
- Replaces: 15528966
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Torsion Bar, Front Driver Side
Part Number: 19330058
$286.95 MSRP: $451.49
You Save: $164.54 (37%)
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15528963
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013, 2000 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 2500 Torsion Bar, Front Passenger Side
Part Number: 19330057
$286.95 MSRP: $451.49
You Save: $164.54 (37%)
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Replaces: 15528964
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013, 2000 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 2500 Torsion Bar, Front
Part Number: 15048312
$257.64 MSRP: $405.40
You Save: $147.76 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion
- Position: Front
- Replaced by: 19332932
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 2500 Torsion Bar, Front Passenger Side
Part Number: 19332928
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Replaces: 15048308
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Torsion Bar, Front Driver Side
Part Number: 19332927
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15048307
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Torsion Bar, Front Passenger Side
Part Number: 19332946
$257.82 MSRP: $405.67
You Save: $147.85 (37%)
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Replaces: 15528958
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Torsion Bar, Front Driver Side
Part Number: 19332945
$257.82 MSRP: $405.67
You Save: $147.85 (37%)
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15528957
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Torsion Bar, Front
Part Number: 19332931
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front
- Replaces: 15048311
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS

GMC Yukon XL 2500 Torsion Bar

Our website offers an extensive catalog of genuine GMC Yukon XL 2500 Torsion Bar at unbeatable prices. Every OEM GMC Yukon XL 2500 Torsion Bar comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Yukon XL 2500 Torsion Bar Parts Questions & Experts Answers

Torsion Bar, Front Passenger Side
19330059
Q: How to replace the torsion bar on GMC Yukon XL 2500?
A: To change the Torsion Bar, first, lift and secure the vehicle. Connect the Torsion Bar unloading/loading tool (J 36202) to the adjustment arm and the cross members, and then pull the adjustment arm to the point that the tension is relieved from the adjustment bolt and the adjuster nut. Mark the adjustment bolt and turn the number of turns required to eliminate the bolt. Next, take off and adjuster nut and then the adjustment bolt for mn8, mt1 and mw3. Having removed the j 36202, let it release and slide it out forward, releasing the adjustment arm and supporting it. First, you need to remove all bolts from the and the Torsion Bar crossmember weld nuts and then the upper links nuts and bolts followed by the removal of Torsion Bar cross member taking note of the position of the left Torsion Bar and right Torsion Bar as they differ. For installation, install the torsion bars on to the lower Control Arm, and install Torsion Bar cross member. Secure the Torsion Bar crossmember bolts to the weld nuts and torque them to 95 nm (70 ft. Lbs.). Then attach the upper mount nuts and bolts, tighten the nut to 95 nm (70 ft lbs.). Moving to the support of the adjustment arm, slide the Torsion Bar rearward until it is complete and attached the j 36202 to the adjustment arm and the crossmember. Tighten up the tension in the adjustment arm in order to load the Torsion Bar, and put in the adjustment bolt and adjuster nut, making sure you use the same number of turns as you removed. Finally, retract the j36202 and leave the tension on the Torsion Bar to be consumed by the adjustment bolt, remove the safe stands, and lower the vehicle down another control the z height, if the z height is low to be raised, twist the adjustment bolt clockwise or to increase z height or to lower z height twist the adjustment bolt counterclockwise.

Related GMC Yukon XL 2500 Parts

Browse GMC Yukon XL 2500 Torsion Bar by Years

2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000