Make sure this part fits

GM 26054968
Pitman Arm

1985-2005 GM

Customer Questions & Expert Answers (11)
GM 26054968 Pitman Arm
  • Part Description
    Arm Kit, Pitman; Steering Pitman Arm; Idler Arm
  • Replaces
    26033087
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1985-2004 Chevrolet S10Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR54 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1985-1994 Chevrolet S10 BlazerBase, High Country, LT, Sport, Tahoe, Tahoe LT4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1992-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1985-1990 GMC S15Base, EL, Gypsy, High Sierra, Sierra Classic4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1985-1991 GMC S15 JimmyBase, Gypsy, High Sierra, Sierra Classic, SLE, SLS, SLT, Timberline4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1991-2004 GMC SonomaBase, GT, SL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1991 GMC SycloneBase6 Cyl 4.3 L GAS
    1992-1993 GMC TyphoonBase6 Cyl 4.3 L GAS
    1996-2004, 1991-1994 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26054968 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26054968 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be inspected after removing the idler arm for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Inspect the ball stud threads and seal for any damage, and clean both the threaded ball stud and the ball stud nut threads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What are the steps for installation of the new pitman arm for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Attach the pitman arm to the pitman arm shaft, install the pitman arm washer and nut, and tighten the nut to 250 Nm (185 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What is the first step to replace the Pitman Arm for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the power steering gear and secure it in a vise.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    How do you remove the idler arm for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the idler arm mounting bolts and nuts from the frame, ensuring to use the proper tool to separate all ball joints.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What should be done after removing the installer for the 2000 GMC Jimmy? Posted by Customer
    A:
    Install a new nut on the idler arm ball stud and tighten it to 82 Nm (60 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What is the first step to service and repair the idler arm for the 2001 GMC Jimmy? Posted by Customer
    A:
    Raise and support the vehicle with safety stands.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What is the first step in the process for the 2000 GMC Jimmy? Posted by Customer
    A:
    Begin by removing the power steering gear and securing it in a vise.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What should be removed from the pitman arm shaft for the 2001 GMC Jimmy? Posted by Customer
    A:
    Remove the pitman arm nut and washer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What is the order of installation for the components during assembly for the 2004 GMC Sonoma? Posted by Customer
    A:
    Install the double lip seal followed by the backup washer, then use the J 4245 to install the retaining ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What tool is used to disconnect the relay rod from the idler arm for the 2003 GMC Sonoma? Posted by Customer
    A:
    Use the Steering Linkage and Tie Rod Puller (J 24319-B) to disconnect the relay rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pitman Arm 26054968 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26054968 Pitman Arm is available in the market under the name GM Idler Arm, Pitman Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26054968 Pitman Arm fits certain Chevrolet S10, Blazer, S10 Blazer models, as well as GMC Sonoma, Typhoon, Syclone. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 26054968 maintains top performance when functioning as the Arm Kit, Pitman; Steering Pitman Arm; Idler Arm unit. The component 26054968 is constructed from durable material and its dimensions span 10.8 x 4.2 x 2.1 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Arm Kit, Steering Pitman. The part 26054968 has available replacement options 26033087. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.